Home automation system control unit RFGB-220/W

Glass touch controllers 2 buttons (ROUND edges) The glass touch controller is a design RF (wireless) Control unit and is available in elegant black and white variants. Only 8 mm thick. RFGB-220: 2 capacitive buttons allows to control 2 devices. When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down). Sending a command is indicated by a red LED. Option of setting light scenes, where with a single press, you can control units of iNELS RF Control. The rear base allows to be attached to installation using screws, double- sided tape or keeping controller on the table. Battery power supply (2x 3 V/CR2032 - included in the supply) with battery life of around 2 years based on frequency of use. Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature. Communication frequency with bidirectional protocol RFIO. Number of channels: 2 Power supply: 2x 3 V batteries CR 2032 Design: glass - round Colour: W - white Dimensions: 100 x 100 x 8 mm Protocol: RFIO2