The PS5000 24 V power supply converts 230 V AC into 24 V DC and thus delivers the supply voltage for 24 V DC devices. Due to the high stability the device is also suitable for difficult loads such as drives.
Power supply with 230 V AC or 275-350 V DC input voltage and 24-28 V DC output voltage
Input voltage 230 V AC or 275-350 V DC
Output voltage can be set between 24 and 28 V DC
Output voltage remains constant in the event of mains voltage fluctuations and load variations of 0-100% within a tolerance of ± 3%
No minimum load required, output voltage remains stable in the load range of 0-100%
No load running test
Maximum constant current is also maintained in the event of overload and short circuit, without the device switching off
LED for displaying the operational status (lights if voltage is on at the output)
Housing
Plastic
Colour
Grey
Assembly
Series installation on mounting rail
Protection category
IP 20
Protection
classII
Norms
Safety EN60950,
EN61558-1, UL1950, UL508, EMV EN55022/B,
EN61000-4 EN55022/B
Dimensions
approx. 108 x 95 x 69 (W x H x D, mm), 6 modules
Minimum installation gap
40 mm above and below
Weight
approx. 360 g
Ambient temperature
Operation: -10…+50°C, storage: -40...+85°C
Ambient humidity
max. 95% RH, avoid condensation
Input voltage
230 V AC ±15% / 50-60Hz or
275-350 V DC.
Power consumption input
approx. 1.4 W at 24 V output voltage,
approx. 1.6 W at 28 V output voltage,
each at 230 V AC input voltage.
Output
24 to -28 V DC,variable.
max. 5 A, 120 W
Efficiency
> 90% (230 V)
Minimum separation between input and output cables
34 mm