Rectangular smoke control damper ESAS is specially designed to use in single fire compartment applications as a closing or as an opening damper for smoke extract purposes.
CE marked
Easy and cost effective installation
Manual and automatic activation
Tested according to the test standard EN-1366-10
Fire class: E 120
Pressure class 500 Pa
Temperature class 600 °C
Sizes from 200x200 mm to 1200x1200 mm
Two safety positions – open and closed
Can transfer to safety position automatically via smoke detection or manually via switch used by fire fighters
Flow direction has no effect on the function of the damper
ESAS is fulfilling the new european product standard EN 12101-8 requirements for single compartment applications and it is CE marked. The product has been tested according to EN 1366-10 fulfilling fire class E 120 with pressure class 500 Pa and temperature class 600 °C.
ESAS dampers are suitable both for automatically by a fire alarm activated systems (AA) and manually, after the fire has started, by fire fighter activated systems (MA), 25 min open / close. ESAS smoke control damper is designed so, that opening or closing can be made even 25 minutes after the fire has started, in 600 °C. Factory mounted electrical actuator is placed inside fire resistant calcium-silicate box. By design phase and installation work it is very important to notice, that all cable system with connection boxes has to be done by fire resistant products. Electrical actuator changes the damper position from open or close with transfer time not more than 60 s. If the electricity is cut off, damper blade will remain in its position.