BUS system with KNX Easy protocol: an advanced control system for residential solutions that complies with European standard EN 50090, allowing each component of the system to talk to each other.
Safety, comfort, energy savings, scenes and remote control: with a simple and intuitive interface which can be controlled via smartphone or tablet, it is easy to manage the system locally or remotely through the internet, with the HAPPYHOME app by Gewiss.
The GW 1x767 Easy motor command actuator is used to control motors on shutters and blinds using an 8 A
relay. The device has 1 channel with an output that has an exchange contact to which two terminals are
connected, one to control the upstroke movement of the shutter/blind, and the other to control the
downstroke movement. Apart from the relay that manages the running of the motor, there is also a relay
connected in series to the first on the line which powers the relay that manages the load so that it is
impossible to interrupt the power to stop the motor from running and that there is a hardware interlock that
prevents the two contacts from being powered at the same time, which would damage the motor it is
connected to. The device is fitted with two front buttons to locally control the motor, 2 two-coloured leds with
night lighting function (amber LED) and a movement in progress status signal (green LED).
The actuator can function in shutter or blind mode, and is capable of handling actuation following priority,
scene and alarm commands. This device sends the bus information on the movement in progress.