Metal garden gate ONE WING

ONE WING GATES One wing gates can be fitted with manual or electric locks. On request they are constructed and prepared to be motorised by arm or embedded system. STRUCTURE OF ONE WING GATES Gridiron's custom made gates always have a support structure of steel tube in various section sizes selected in proportion to the size of the gates. They are completed by various types of internal panelling: very open mesh grating, which can be chosen to correspond to the fencing installed around the perimeter, or very close mesh grating (132x11), or otherwise in punched or blind sheet metal. Our custom made gates are always given a hot-dip galvanising treatment that ensures quality and durability. INFORMATION TO BE SPECIFIED • The direction of opening viewed from the inside from right to left (A) or left to right (B) • Height (H) of the wing • Width (W) of the open space between walls one wing gate, structure with tube base 80x40x3mm, frame and tube uprights 40x40x3mm with electroforged grating panelling, mesh 63x66mm, bearing bar 25x2, cross round bar, complete with pillars supports and electric lock, hot-dip galvanised and RAL painted. one wing gate, structure with tube base 100x50x3mm, frame and tube uprights 50x50x3 with panelling mesh 132x22, bearing bar 25x2, cross bar 10x2 complete with wall supports and electric lock, hot-dip galvanised and RAL painted. one wing gate, structure with tube base, frame and tube uprights 50x50x4mm with metal blind sheet panelling, complete with wall supports and electric lock, hot-dip galvanised and RAL painted.