The Fixed Height Pedestal is installed by screwing, and the height is adjusted according to the planning and construction needs. The width of the stone gap in the equipment is controlled and adjusted by a "separator", and the unevenness of the stone is adjusted by a spacer.
The Moonbay Fixed Height Pedestal System is made to allow Wood Deck Tiles, Concrete Pavers, or Porcelain Pavers to lay flat over a built-up roof. The self-leveling, one model for all height applications, screw adjustable, PVC pipe adjustable, and stackable features of our fixed height pedestal hybrid screw-jack pedestal support system make it a cutting-edge product. With a roof membrane on top, the substrate can be either a concrete or wood construction.
Ground installation requirements for the Fixed Height Pedestal: Before construction, the ground is required to be relatively flat without some unevenness, and the cement floor can be matte.
The screw connection requirements of each component of the supporter; the required height can be adjusted by rotating each component left and right, be careful not to screw too tightly or out of the indicated range.
How many pcs of pedestal do I need for each SQM?
For tiles:
Tile Size PCS/SQM
600 x 600 mm 2.8 PCS
500 x 500 mm 4 PCS
400 x 400 mm 6.3 PCS
For decking boards:
Each SQM needs 4-5 pcs of pedestal for standard installation
Can our pedestal compensate slope on the ground?
Yes, we have slope corrector to compensate slope 0%-5%, making perfect leveling floor surface.