AT120 Primer is suitable for cleaning and improving the adhesion of weathertight sealants to a range of non-porous substrates
AT120 Primer is suitable for cleaning and improving the adhesion of weathertight sealants to a range of non-porous substrates.
Ideal for cleaning/priming prior to the application of illbruck silicone sealants
For use on non-porous substrates
Ideal for cleaning / priming prior to the application of illbruck silicone sealants
For use on non-porous substrates
USE IN WELL VENTILATED CONDITIONS and ensure ail
recommended protective equipment is worn during handling & use
of this product. For full recommendation, refer to safety data sheet.
Apply a thin coat of AT120 using a cloth or felt pad.
Only use the necessary quantity and allow surface liquid to
evaporate.
Close the container immediately after use and protect from humidity.
Drying time will be increased in lower temperatures and decreased
in higher temperatures, and will also depend on humidity.The time
indicated in the technical information table above is based on +23°C
& 50% RH.
Consumption will vary depending on depth of the joint.
Quickly remove any spilt primer with a cloth.
For confirmation of primer requirements on différent substrates,
please consult primer table on the spécifié sealant data sheets.
It is recommended to test a small area first before proceeding with
the full application.