The comfort solution for minimalist architecture.
The perfect built-in solution without sacrificing heating capacity.
Space-saving
Low-H2O technology with super conductive and ultra fast heat exchanger for low energy consumption and maximum heat emission
Safe and low contact temperature
Guidelines for installation
Set up the boxes so that the heat exchanger remains accessible for an annual cleaning service.
The outputs indicated are based on a free air flow of 75% of the depth. If the free opening is smaller, a correction factor must be applied to calculate the heat output.
Material
− Low-H2O heat exchanger is composed of round, seamless circulation tubes made of pure red copper, with pure aluminium fins and two brass collectors for left or right 1/2” same end connection. Air vent elbow
(standard) or automatic air vent (twin) 1/8” and drain plug 1/2” are included.
− Pressure test: 20 bar
− Working pressure: 10 bar
− Brackets are included and made of sendzimir galvanised steel plate of 1 mm; supplied to be installed with a maximum intermediate distance of 1.05 m.
Separation wall (not suitable as definite casing)
Double profiled, electrolytic galvanized steel plate of 0.7 mm thick ; lacquered dark grey. To be attached to the lips of the brackets. The separating wall has to be fitted as close as possible to the grille.
Colour
Heat exchanger electrostatically lacquered with anthracite grey epoxy-polyester RAL 7024.
Manufacturer: Jaga
Type: Heat exchanger for installation into a wall recess
Outputs meet standard EN 442.
Options
- Top valve
- DBH Upgrade set
- Automatic air vent for heat exchanger type 10 / 15 / 20.