Range of uses
For coatings on external woods with a higher demand (wooden cladding, fences, palisades, balustrades), hard PVC and galvanised sheet steel (gutters and fallpipes).
Wood components and rust are isolated (with the shade of white), application as prime and top coat, stable shade and low in odour, ventilating, high elastic and water-dilutable. With film protection against algae und fungal attack. Please observe: In order to obtain the product-specific properties, do not mix with other products!
Degree of gloss
(23°C 60 % rel. air humidity)
Dust-dry: 2-3 hours; Re-coatable: 8-10 hours; Through-dried and loadable: 2-3 days. The values can vary considerably depending on the temperature and air humidity.
Ca. 7 m²/ltr. Determine precise consumption by means of trial coating.
Type of application
Brush: Use brush with artificial bristles. Roller: Use short-pile mohair roller. Spray: Dilute with max. 5 % water. Airless: pressure ca. 200 bar nozzle: 0,28 – 0,33 mm ; 0,011 – 0,013 inch. Air Coat: pressure ca. 140 – 160 bar nozzle: 0,28 – 0,33 mm ; 0,011 – 0,013 inch. High pressure: pressure 3 – 5 bar nozzle: 1,5 to 2,0 mm. Fine Coat: pressure ca. 0,48 bar nozzle: 1,8 mm
white, grey white 9002, light ochre, Sweden red, moss green 6005, pigeon blue 5014, silver grey 7001, red-brown, chestnut brown 8015, chocolate brown 8017, black 9005 and special shades via a base lacquer are possible.
Field of application
750 ml, 2,5 ltr, 5 ltr, 10 ltr in white (coloured shades on request)