Decorative paint AQUA LACQUER

finishindoorfor wall

Application
Primer and cover coats for ceramic substrates. No separate primer required. For decorative new designs on old wall tiles, tiled sections or tiled bases. Our transparent finishing coat Jansen Aqua Wall Tile Lacquer Finish must be used as a final coat in wet room areas and tiled sections in kitchens.

Product properties

• Excellent adhesion on matt, semi gloss and gloss tiles
• Creates a robust, scratch-resistant surface
• Low odour, non-yellowing

Binder base
Special acrylate

Degree of gloss
Semi gloss

Drying
(At 20°C and 60% relative humidity): Dust-dry: after 1 hour. May be coated over: ca. 4–6 hours. Fully resilient: after ca. 4 days. These values can vary significantly depending on temperature and humidity.

Spreading rate
Ca. 10–12 m²/ l per coat

Type of application

• Brushing: Use brush with plastic bristles for painting
• Rolling: Use short pile mohair rollers
• Spray

Shade
White; miscible with the tinting machine Jansen MIX

Field of application
Interior — decorative renovation of old wall tiles, tiled sections and tiled bases. In wet rooms and kitchen splashbacks use the transparent finish coat Jansen Aqua Wall Tile Lacquer Finish as final coat.

Package size
750 ml, 2.5 l

Technical specifications

• Binder base: Special acrylate
• Degree of gloss: Semi gloss
• Drying (20°C, 60% RH): Dust-dry after 1 hour; recoatable after approx. 4–6 hours; fully resilient after approx. 4 days
• Spreading rate: approx. 10–12 m²/l per coat
• Type of application: Brush (plastic bristles), short pile mohair roller, spray
• Shade: White; can be tinted with Jansen MIX
• Field of application: Interior (decorative new designs on old wall tiles, tiled sections or tiled bases)
• Package sizes: 750 ml, 2.5 l
• Properties: Excellent adhesion on matt, semi gloss and gloss tiles; robust, scratch-resistant surface