Decorative paint Poxemyc UV 2/C RAL 9006

protectiveoutdoorinterior

Two-component enamel, based on hydroxylated acrylic resins and polyfunctional aliphatic isocyanate hardener, giving tough hard surface finish, providing excellent gloss and color retention. Recommended for the protection of all kinds of ferrous surfaces; steel, iron (previously primed), galvanized and aluminum (previously treated), non-ferrous concrete, wood, polyester with fiberglass, PVC, where high chemical and weather resistance is important. Ideal for painting wagons, tanks, warehouses, machinery, ships, industrial buildings that are going to be subjected to aggressive atmospheres. Not recommended for painting surfaces with tar and/or bituminous asphalt coatings. Hard abrasion resistant finish Exceptional weather resistance Resistant to UV ultraviolet rays Good resistance to oils, solvents, acids and alkalis Resists temperatures up to 150ºC Smooth and shiny high quality finish. Spray application: Use D-70. Short-bristle brush and roller: Use D-71 NEW METAL SURFACES. The surfaces must be free of grease, rust and calamine. Apply a coat of Antioxidant Primer DYNAPOK ZINC PHOSPHATE PRIMER 2K, (code 22722) and finish with two/three coats of POXEMYC, depending on the desired thickness. OLD METAL SURFACES. On old painted survaces remove the remains of poorly adhered paint and proceed as above. ALUMINUM AND GALVANIZED. Eliminate the rust typical of galvanizing by washing with detergents, fresh water and abrasive synthetic fibres. If necessary, sand to refine the surface. If greater protection is needed, apply a coat of DYNAPOK 2K PRIMER (Code 22.722). CONCRETE SURFACES Wait until fully set (min 1 month).