Pitched roofing sheet ROOFTILE

steelroof tile lookcorrugated

Rooftile is the most perfect and developed steel roof in tile shape form, produced by Kamaridis GlobalWire Group Offers all the advantages of the classic French ceramic tiles without the disadvantages. Durability in unfavourable weather conditions In the U.S.A. further to the catastrophic cyclones in the Florida State, very severe regulations were adopted concerning the strength and the durability of the cladding and roofing material covering. Rooftile was tested in the laboratory under the supervizion of the University of Miami. The results show that Rooftile resists in wind loads up to 10 kPa. The wind loads in Greece are usually up to 6,5 kPa. Unique advantages of Rooftile • Specific pressing procedure Due to the modern forming machinery of KAMARIDIS SA, the specific procedure of Rooftile manufacturing results in the maintenance of the metal durability. • Variations of tile length The standard tile length is 330 mm. Upon special request, each tile can be manufactured in lengths that vary from 80 mm to 450 mm. • Curved shape Due to its elasticity, Rooftile, in the form of short tiles, can be installed on curved roof carriers. • Long sheets The recommended maximum sheet length is 6 m. Rooftile is manufactured in customised longer sheets, which are only limited by the installation and transportation capability. • Low weight - high strength Rooftile weighs only 1/10 of the corresponding ceramic tile weight. The material strength ensures full roof load capacity, without any deflections. • Application in low pitch roofs Rooftile is the only product in the form of tile, which can be used for two-sided and multiple-sided roofs with a minimum pitch of 7.5%.