stainless steel grating for drain channel / for public spaces



  • Material:

    stainless steel

  • Applications:

    for public spaces


Kent Heel Mesh Grating has 8mm x 44mm openings and either 2mm or 3mm load bearing bars depending on the loading required and the free span of the channel. It is perfect for areas with a propensity for High Heel Traffic – Streetscapes, Railway Stations, Airports, Public Plaza.

The KHMG is perfect for areas with large volumes of wash down water and vat discharge.

Finish is Electropolished for extra hygiene. Can alternatively be supplied with a Bead Blasted or Satin Finished top.

Typical sizes are 146mm wide and 196mm wide x 990mm, 207mm x 207mm, 307mm x 307mm.
All sizes can be fabricated
25mm depth as standard – increased to 40mm or 50mm where loading requires this. Top Bars typically 2mm – can
be increased to 3mm/5mm/8mm where required either for loadings or for aesthetic reasons, or where a wider
surface area is preferred under barefoot.

This Mesh is often used also as an Air Vent Cover – eg in an office block or airport. It is regularly called for in these applications with cut-outs for LED uplighters. Often depth is reduced to 20mm for Air Vent Covers

as these have little or no traffic overhead.
It has also been referred to as Kent Close Mesh Grating (KCMG)

Recommended for:
Pallet Trucks

Other Kent Stainless products

External Drainage