Wooden planter NECK
steelconicalwith integrated bench

wooden planter
wooden planter
wooden planter
wooden planter
Add to favorites
Compare this product
 

Characteristics

Material
wooden, steel
Shape
conical
Options and accessories
with integrated bench
Style
contemporary
Market
for public spaces

Description

The NECK planter is made in steel 30/10 thickness. To obtain the peculiar conical shape characterizing the planter, the steel sheets go through a specific calendering and are later welded through continuous welding. On the perimeter of the upper side a band of 35 mm 30/10 thickness is is welded. On the bottom of the planter there are 3 drain pipes, made in steel, section 30x30x2 H 50 mm. Under the planter there's a base for the correct leveling. The base is covered with a stainless steel AISI 316 band 15/10 thickness. The seat is made with 16 exotic wood elements 40 mm thickness, 420 mm length, 170 mm maximum width, fixed with specific screws to a laser-cut plate 30/10 thickness. The plate is welded to supports made in tubular steel with section 40x40x2mm. For the realization of this product, Steel EN10111DD11 is used and later treated with a cycle of sandblasting, cataphoresis and polyester-powder coating with RAL colors at choice. Such cycle is meant to guarantee the protection of the painted products in an environment of C4 corrosion class - UNI EN ISO 12944-2. The wood used is either Iroko or Okume, treated with natural, water-repellent, UV ray resistant oils. Weight of steel: 280 kg Capacity: 1740 lt

Catalogs

No catalogs are available for this product.

See all of LAB23‘s catalogs

Other LAB23 products

Planters

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.