R32 Chillers and heat pumps from 21 kW to 32 kW
DC inverter compressor are of the hermetic rotary type, expressly designed
for operation with R32, equipped with thermal protection and mounted on
rubber vibration dampers. This component is installed in a compartment
separated from the air flow to reduce noise and is provided with casing
resistance to avoid oil dilution of refrigerant providing the correct
lubrification and reducing the usury of the moving parts. Compressor
inspection is possible through the removal of side and front panels of
the unit, permitting maintenance also with unit in operation.
Grade AISI 304 stainless steel brazed plate heat exchanger coated with
black closed-cell flexible elastomeric foam; 9 mm thickness thermal
conductivity (λ)≤0.036 W/mK (with air +20°C). A flow switch fitted on
the water side guarantees the water flow and prevents ice from building
up inside with the protection probe. The exchangers can be equipped
with antifreeze electrical resistance (optional accessory KA.
Structure suitable for outdoor installation consisting of high-thickness
profiles made of hop-dip galvanised steel sheets coated with polyester
powder, coated with RAL 7035 bush-hammered finish resistant to
weathering. Removable panels allow maintenance inside the refrigeration
circuit and the hydraulic circuit.
Air exchangers are completely made of aluminiumin, that allows a
significant reduction in both air-side pressure drops and refrigerant
charge ensuring at the same time a higher capacity for exchage with
the same front surface area compared to traditional exchangers and a
lower refrigerant charge.