Spray disinfection system PG 8536 [ADP SST]

steamultrasonicobject

Overview
Washer-disinfector for medical, laboratory and dental reprocessing. Freestanding stainless steel construction with integrated feed pump for demineralised (DI/AD) water (ADP variant). Usable wash cabinet capacity: 137 L. Suitable for hospitals, clinics and laboratories requiring documented cleaning and thermal disinfection.

Key benefits (high-level)

• Active hot air drying with H14 HEPA filtration for effective internal and external drying of instruments.
• Profitronic+ control with freely programmable programmes and multiple factory presets for flexible process configuration.
• Spray arm monitoring and automatic mobile unit recognition for consistent cleaning and process safety.
• Conductivity monitoring and ultrasonic dispenser control for reproducible dosing and residue-free final rinse.
• Comprehensive process documentation interfaces and remote-service capability for traceability and efficient maintenance.

Construction type and version
Type: Freestanding, wide appliance.
Casing and wash cabinet: Stainless steel (1.4301 / 304).
Electric door lock and acoustic end-of-programme signal included.
Service-friendly design for maintenance access.

Application / Suitability
Designed for medical, laboratory and dental reprocessing tasks. Suitable for hospitals, surgical/outpatient practices, laboratories and diagnostic facilities that require validated cleaning and thermal disinfection processes.

Capacity (examples)
DIN mesh trays per cycle: 7
MIS sets per cycle: 2
AN sets per cycle: 2–3
Narrow-necked glassware per cycle: 66
Pipettes per cycle: 96

Performance data
Circulation pump Qmax: 600 l/min
Maximum final rinse temperature: 93 °C
Wash cabinet usable capacity: 137 L
Tested operating hours (laboratory): 15000 h

Control system
Control: Profitronic+ with Touch on Glass selection.
Max. delay start: 24 h. Programmability: freely programmable (user/program slots).
Factory programmes: 18. Free programme positions: 30.
Intelligent A0-value control included. Remote service enabled. Automatic programme restart and failure protection. Time-left and sequence display; selectable display languages.

Water connection / drainage
Cold water connections: 1. Cold water for steam condenser: 1. Hot water connection: 1 (optional to save time/energy).
ADP variant: supplied with DI water connection and additional feed pump for low on-site pressure connection.
Required flow pressure (cold/hot/DI): 250–1000 kPa (DI intake uses feed pump; intake pressure requirement differs).
Maximum drain pump delivery head: 100 cm. Integrated water softener included. Waterproof System (WPS) for flood protection.

Drying unit
Active hot air drying with integrated unit.
Fan power: 0.3 kW. Drying heater element: 2.3 kW (total drying load 2.6 kW).
Air throughput: 60 m³/h. Temperature range: 60–115 °C (1 °C steps). Time setting: 1–240 min.
HEPA filter class: H14 (99.995% per DIN EN 1822). HEPA service life: approx. 500 h.

Electrical connection (standard)
Electrical connection: 3N AC 400 V 50 Hz. Electric heater rating: 9 kW. Total rated load: 10.2 kW. Fuse rating: 16 A. Mains connection cable length: 1.6 m (supply lead outside appliance).

Dimensions and weight
External dimensions (net): H 1175 mm × W 900 mm × D 700 mm.
External dimensions (gross incl. packaging): H 1380 mm × W 1200 mm × D 800 mm.
Wash cabinet usable height: 520 mm. Usable width: 530 mm. Depth upper basket: 474 mm. Depth lower basket: 520 mm.
Net weight: 177 kg. Gross weight incl. packaging: 208 kg.

Emissions / heat / noise
Emission sound pressure level (workplace): ≤ 70 dB(A) re 20 µPa. Heat dissipation into room (max): 1.62 MJ/h.

Programmes and application highlights (selection)

• Vario TD / Vario TD variants (standard cleaning and disinfection).
• VAR-TD-NR, DES-VAR-TD, DES-VAR-TD-AN.
• LAB programmes: LAB-STANDARD, LAB-UNIVERSAL, LAB-INTENSIVE, LAB-PIPETTES, LAB-OIL.
• ORTHOVARIO (orthopaedic instruments).
• OXIVARIO / OXIVARIO Plus (intensive protein/organic soil removal).
• CHEM-DISIN and specialised cycles for specific load types.

Features

• Integrated bellows-type dispenser pumps for liquid cleaning and neutralising agents; optional additional pumps available.
• Ultrasonic dispenser volume control for precise, reproducible dosing.
• Spray arm rotation monitoring for reliable cleaning performance.
• Optional conductivity monitoring to ensure residue-free final rinse.
• Process documentation interfaces (RS232 / Ethernet) for traceability.
• Multi-component filter system and high circulation-rate pump for thorough cleaning.
• Automatic mobile unit recognition via magnetic strip for programme selection.
• Interior and door panel of high-quality stainless steel (1.4301 / 304).
• Wide range of optional components and consumables for medical and laboratory reprocessing.

Technical specifications

• Brand: Miele
• Model / Commercial designation: PG 8536 [ADP SST]
• Type: Washer-disinfector (ADP variant with feed pump for DI/AD water)
• Material: Stainless steel casing and wash cabinet
• EAN: 4002514859903
• Article / Material number: Article number 62853625GB / Material number 07831490
• Circulation pump Qmax: 600 l/min
• Final rinse max temperature: 93 °C
• Wash cabinet usable capacity: 137 L
• Drying HEPA class: H14 (99.995% efficiency)
• Electrical connection: 3N AC 400 V 50 Hz; total rated load 10.2 kW (heater 9 kW); fuse 16 A
• Dimensions (net): H 1175 × W 900 × D 700 mm
• Net weight: 177 kg