Aluminium louvre wall, heated
System 755Hei
MLL aluminum louvre wall heated with a free ventilation cross-section of 69%. The mounting at a facade done by the supporting pillar. The slats are fixed to the MLL-Clip system and later, for example for repair work on the facade or similar removable again.
Heavy Series: Z-slat, heated
Fin spacing: 100 mm
Assembly: Slat 050Hei on supporting pillar 005, supporting pillar 005 with retainer 15.2, supporting pillar distance 1200 mm
Fly screens: Fiberglass MW 1.4mm / 1.4mm Nirosta MW
Bird protection: Galvanized MW 10 mm / 8 mm Nirosta MW
Surface: E6 / EV1 anodised, E6 / C31-35 shades, RAL to choose / raw
Special colors on request
* Connecting / Wiring through a qualified electrician
SPECIFICATIONS / WIRE:
Max. Permissible operating temperature: 65 ° C
Max. Permissible ambient temperature: 80 ° C (heating power off)
Work area: +10 / -40 ° C
The MLL system type 755Hei is a heated louvre wall. The slats are provided with heating wires and heat (heat regulation is done through thermostat), depending on the outside temperature. Ice and snow are prevented on the fin surface.
APPLICATION:
Suitable for ventilation and ventilation for the outdoor and explosion-proof area. Wherever a free air circulation must be ensured to the weather protection system reliably protect even at outside temperatures below 0 ° C before icing and icicles and thus ensure the necessary ventilation cross section for systems.