Decorative coating FLORENZIA
plasterfor interior wallsindoor

decorative coating
decorative coating
decorative coating
decorative coating
decorative coating
Add to favorites
Compare this product


Type of support
plaster, for interior walls
lime-based, mineral
high-gloss, stucco finish
ecological, low-VOC, low-odor


Florenzia is a decorative mineral plaster for interiors, composed of pure slaked lime-air putty, selected inerts, rheological modifiers and organic additives (<4%). The application of Florenzia grants high-end glossy decorations, with soft yet vibrant tones. USES Florenzia can be applied on: - new and old plasters based on hydraulic binders; - plasters and plasterboard surfaces; - old paints and coatings of organic or mineral nature, dry, compact, absorbent and cohesive; - conglomerates of various mineral nature as long as they are absorbent. Surfaces must be prepared in accordance with the procedures show in the “SUBSTRATE PREPARATION AND APPLICATION” paragraph. Do not apply on fresh substrates. IDENTIFICATION FEATURES Binder nature: slaked lime, water dispersion of an organic binder (<3%) Density UNI EN ISO 2811-1: Florenzia: 1,40 +/- 0,05 g/ml Determination of volatile organic compounds (VOC) ISO 11890:2 (not diluted) < 1 g/l PERFORMANCES Vapor-permeability UNI EN ISO 7783-2: high. V=350 g/mq in 24 h; Sd= 0,10 m, for thicknesses of 0,6 mm – values detected from white. Drying (at 25 °C and 65% U.R.): touch-dry in 3 hours; overcoatable after 6 hours approx., depending on the thickness. Indoor Air Quality: A+ DILUTION Florenzia: ready for use


*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.