Metal primer IMPRIPOL

acrylicindooroutdoor

White two-component anticorrosive primer, based on solvent-based acrylics crosslinked with aliphatic isocyanates, for application on ferrous metal surfaces. An ideal base for repainting with ACRIPOL + ACRIPOL CATALYST. applications Outdoor/Indoor Iron Steel Metal How to apply? Brush Airless spray gun Air mix spray gun Airbrush Low-pressure turbine Colors White • Stir both products until they are perfectly homogeneous. • Mix in the prescribed proportions and let the mixture sit for about 5 minutes. • It is recommended to achieve total coating thicknesses between 25 and 100 microns, depending on the desired protective effect. • Apply to clean and dry substrates, removing dirt with degreasers or detergents and clean water. • Apply following the instructions provided in the attached application chart. • Do not apply the product at high temperatures or on surfaces exposed to strong sunlight. • Maintain good ventilation conditions during the drying time. • Do not apply at relative humidities higher than 80% and apply at temperatures above 5° C. • If you exceed the recommended maximum interval for repainting, sand to ensure good adhesion between coats and verify that the adhesion is correct. Otherwise, remove the coating.