Specification
Visible width interior
50 mm
Visible width exterior
50 mm
Transom, visible part depth
6-185 mm
Transom, moment of inertia (Ix)
0.50-476.37 cm4
Transom, moment of inertia (Iy)
3.60-46.89 cm4
Decorative covers
15.5 mm, 18.5 mm, 23 mm, 103 mm
Glazing infill thickness
4-8 mm, 22-32 mm
Number of transoms
22 pcs
Integration with Realit® systems
RW 64, RW 71, RW 71 HI, RW 71 HI+, RI 50, RI 44, RF 68 EF, RPE 35, RVL 40
Facades assembled on a metal or wooden frame
The RF 50 RR Realit® facade system is easy to fabricate and assemble. It is compatible with the classical RF 50 system. RF 50 RR is a rationalised system that implements the same profiles (RF 50 transoms) as mullions and transoms to ensure a considerable reduction in the range of profiles used and optimisation of their cutting. Transoms and mullions do not overlap but are connected with brackets.
- The facade structure made from the RF 50 RR transom/transom system supports the installation of windows and doors of any opening types.
- The specifiers can select the necessary load-bearing elements depending on the project specifications and loads applied to the bearing structure. For this purpose, the RF 50 RR system has a wide set of profiles with moments of inertia Ix ranging from 16 to 476 cm4.
- The glazing infill thickness ranges from 4 to 8 mm for glass and from 22 to 32 mm for glass panes.
- To seal the mullion and transom connection area and to remove water from the rebate area of the glass pane, a rubber drip cuff is installed at the connection point.