Home automation system control unit BSF

The base station can be connected to a DeltaSol® BX Plus, MX or DeltaTherm® HC, HC mini, HC MAX and is used for single room control in combination with a wireless room control unit. Switching capacity: max. 1 A (potential-free relay) Power supply: 230 V / ±10% / 50 Hz Standby: <1 W Ingress protection: IP20 Protection class: II Ambient temperature: 0 °C to +60 °C Dimensions: 86 x 86 x 33 (WxHxD) Material: ABS Radio range: 25 m in buildings / 250 m in open air Number of heating zones: 1 Overvoltage category: II Humidity: 5 - 80 %, not condensing Controlling precision of the target value: ±1 K Hunting: ±0,2 K Modulation: FSK Carrier frequency: 868 MHz, bidirectional Radiated power: max. 10 mW Mains connection: NYM connection terminals 2 x 1.5 mm² Danger to life due to the electrical voltage at the base station ¾ Always disconnect from the mains network and secure against unintended activation before opening it. ¾ Disconnect external voltages and secure against unintended activation. ¾ Only use the product if it is in flawless state. ¾ This unit is not intended to be used by persons (including children) with restricted physical, sensory or mental skills or who lack experience or knowledge. If necessary, these persons must be supervised by a person responsible for their safety or receive instructions from this person on how to use this unit. ¾ Ensure that children do not play with this device. Children must be monitored if necessary. ¾ In case of emergency, disconnect the complete roomby-room temperature control system.