Pipe connector FLANGE ADAPTORS / DISMANTLING JOINTS

For joining a flanged part to the spigot end of pipes or tubes Used to connect networks composed of different materials or specially designed for one material, flange adaptors join a flanged part to the spigot end of a pipe or tube. They come in anchoring or non-anchoring versions, while the self-anchoring (locking) products do not necessitate concrete anchor blocks. Available products UltraQuick flange adaptor Very broad tolerance for use with a variety of materials Can be fitted to grey cast iron, ductile cast iron and fibre cement pipes as well as to steel or PVC tubes Available for continuous lengths of pipe with exterior diameters between DE 49 and 348 mm and a PFA of 16 bar Substantial angular deflection at approximately 6° Multi-pitch circle flange PN 10 and 16 Quick GS, flange adaptor for ductile iron pipes Available from DN 60 to DN 200 in the anchoring version and from DN 60 to DN 300 in the non-anchoring version PFA of 16 bar for both versions Multi-pitch circle flange PN 10 and 16 Quick GS, flange adaptor for ductile iron pipes with large diameters Available from DN 350 to DN 1000 in a non-anchoring version PFA of between 10 and 16 bar Quick PVC automatic anchoring flange adaptor for PVC Available from DN 40/DE 40 to DN 200/DE 225 in anchoring and non-anchoring versions PFA of 16 bar for both versions Multi-pitch circle flange with PN 10 and 16 A simple or anchored QuickBlutop range exists for possible assembly only on BLUTOP (DE 60 to DE 150 mm) pipes Quick PE mechanical anchoring flange adaptor for PE Available from DN 50/DE 63 to DN 400/DE 400 PFA of 16 bars Multi-pitch circle flange with PN 10 and 16