Thermal insulating glass panel EKO® PRO

low-efloattemperable

Product description
EKO® PRO is a low-emissivity clear float glass engineered for use as a single glazing on horizontal cover lids of freezers and ice-cream cabinets. The glass carries a thin, transparent heat-reflective coating deposited by proprietary high-end technology to improve thermal performance while maintaining high transparency and low reflection.

Benefits & applications

• Energy savings: up to 20% reduction in energy consumption versus competitive glasses (Danish Technical Institute test report available on request)
• Reduced operating costs for retailers and faster payback on energy bills
• Condensation control: significant reduction of condensation under most climatic conditions
• Optimal visibility: high clarity and low reflection for improved product display
• Monolithic single-glazing solution: suitable as single glazing in horizontal covers (coating facing inwards) after tempering for a lighter assembly with good thermal and safety properties
• Customisable: can be tempered, bent and screen printed to customer specifications

Appearance
EKO® PRO is a clear glass substrate with an almost invisible low-emissivity coating that preserves product visibility.

Technical information
RANGE
Standard thickness 4 mm on clear float glass. Standard maximum dimensions 6000 x 3210 mm. Custom sizes and thicknesses available on request.

PROCESSING
After cutting and edge working, tempering is required to reach nominal performance. Coating must face up during processing. Screen printing with validated enamels and bending are possible (bending dependent on furnace). Assembly into insulated glass units is feasible after edge deletion of the coating.

PERFORMANCE
Performance data available (performance table measured according to cited standard).

Technical specifications

• Product name / commercial designation: EKO® PRO
• Function / application: Low-emissivity glass for horizontal freezers and ice-cream cabinet cover lids (single glazing use)
• Base material: clear float glass
• Coating: thin, transparent heat-reflective low-emissivity coating
• Standard thickness: 4 mm
• Standard dimensions: 6000 x 3210 mm
• Processing requirements: tempering required after cutting and edge working; coating must face up during processing
• Fabrication options: tempering, bending (depending on furnace), screen printing with validated enamels
• Insulating unit compatibility: possible after edge deletion of the coating
• Key benefits: up to ~20% energy savings (test report), condensation control, high transparency and low reflection, monolithic single-glazing use after tempering
• Environmental: covered by a verified Environmental Product Declaration (EPD)