Concrete primer DECOPRIMER

for masonryplasterfor bricks

Interior wall effect paint primer SCOPE OF APPLICATION DECOPRIMER is used as an undercoat for acrylic based decorative coating materials applied on all kinds of mineral surfaces like concrete, aerated concrete, pressed bricks or thin plaster, gypsum plaster. FEATURES - It creates a rough surface on the surface. - It adheres very well to the surface and prepares the ground for other decorative materials to be applied. - It has high coverage. - It is water based; It does not smell and does not harm human health and the environment. SURFACE PREPARATION Clean all dirt, oil, blistered paint and dust off the application surface; level the surface defects with SAN DECO ACRYLIC PUTTY INTERIOR. APPLICATION INSTRUCTIONS Prior to application, Dilute DECO PRIMER with 25-30% of fresh water and mix it mechanically until homogeneization; and then apply it in one coat with a roller. - The environment of application must be kept between +5°C to +35°C within 24 hours during and after the application. DRYING TIME Allow 2-3 hours for touch dry and 24 hours for complete dry at 23oC environment conditions. THEORETICAL CONSUMPTION According to the smoothness of the surface, its porosity and application methods, for a single layer application: - 1 lt covers 10,5 - 15,0 m² of surface - 1 kg covers 6,5 - 10,0 m2 of surface - The paint consumption for 1 m2 area is 65-100 ml and 100-150 gr.