Metal profile SCHLÜTER®-BARA-RTKE/-RTKEG
edge

metal profile
metal profile
Add to favorites
Compare this product
 

Characteristics

Material
metal
Cross section
edge

Description

Schlüter®-BARA-RTKE/-RTKEG are finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Schlüter®-BARA-RTKE is especially suited for assemblies with the bonded drainage mat Schlüter®-DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. In addition, the profile covers the exposed edges of the bonded drainage mat Schlüter®-DITRA-DRAIN, which is installed under the covering. The cross section of the profile openings is sufficiently large to guarantee drainage and ventilation. The trapezoid perforated anchoring leg of Schlüter®-BARA-RTKE is attached to the exposed edges with a dry set tile adhesive. The bonded waterproofing mat Schlüter®- KERDI is installed over the perforated anchoring leg and the adhesive flange of the profile with the sealing adhesive Schlüter®- KERDI-COLL. If trowel applied bonded waterproofing products are used, the corresponding installation instructions of the manufacturer must be observed.

Catalogs

No catalogs are available for this product.

See all of Schluter-Systems‘s catalogs
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.