Electric elevator S.H.E 001

home

The foremost feature of the home lift S.H.E-001 is that it doesn’t have lift car doors, so its operation is done through the continuous push of a button. Additionally, the landing doors are semi-automatic. It is designed to be installed in spaces with less room. It only needs a an area of a bit more than 1×1 m (width x depth) for the shaft. It is a single-phase, low-consumption electric home lift that does not require counterweights or a machine room. It can be used without the need to increase a home’s electrical output. You can choose the finish, or personalise the car’s panel. Minimum shaft : 1.100 x 950 mm Car: Minimum dimensions: 800 x 800 mm. Maximum dimensions: 1.000 x 1.250 mm. No doors on the lift car. Free-access door: 700/800 mm. Headroom in the lift car: 2,100 mm. Minimum clearance above the lift car: 2,600 mm. Minimum shaft pit: 190 mm. Type of traction: single-phase electric 220v. Type of actuation: conveyor belt. Nominal load: 300 kg. Boardings: single (possibility of double). Maximum travel distance: 15m. Consumption: 1.5 kW. Landing doors: semi-automatic. Lift car doors: no doors. (Car doors are optional.) Variable frequency. Autonomous rescue system, with doors opening in the event of a power failure. In-car “stop” button. Two-way telephone. Parachute safety device powered by a speed limiter. Photoelectric barrier. Continuous pulsation for when there are no car doors (mandatory). Interlocking of landing doors and car doors when in motion. Emergency lighting in the case of power outages.