Solid finger joint panels are made up of wood lamellas consisting of finger jointed small pieces glued at the edge. With this system we obtain a very stable product (the internal tensions of the wood of some pieces are compensated with others), especially important in elements of large dimensions.
Increased dimensional stability
High quality finish
Guaranteed moisture content
Ready for immediate work
Other qualities available on request.
Class A: Occasionally small healthy knots.
Class B: Small sapwood wedges (sweet chestnut, oak and acacia), and small knots are permitted.
Class C: Sapwood, healthy knots and small black knots are allowed.
D3 according to EN 204
Class E1 according to standard UNE EN 13986
10 ± 2%
On the edge, not visible on the panel face
Individual plastic film
Solid finger joint panels are made of lengthwise finger-jointed lamellas laminated widthwise until the panel is formed. It is the ideal product for stairs, worktops, furniture, decoration, carpentry, flat surfaces, etc. It adapts to all uses in which solid wood is traditionally used.
• Type of glue: D3 in accordance with the standard UNE-EN 204
• Formaldehyde: Class E1 in accordance with the standard UNE-EN 13986
• Moisture content: 10 ± 2%
• Finger-joint: on the edge, not visible on the face of the panel
• Sanding: 120 Grit sandpaper
• Packaging: Individual wrapping
Sweet chestnut • European oak •
Light steamed beech • White beech •
Iberian walnut • Ash •
Maple • Cherry • Iroko • Sapelli •
Wengue • Zebrano • Black acacia