Epoxy sealant SET-XP®

polyurethanefastening

SET-XP epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification. Key Features 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508 Code listed under the IBC/IRC for masonry per IAPMO UES ER-265 Code-listed equivalent to cast-in-place reinforcing bars governed by ACI 318 and IBC Chapter 19 Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry Cure times: 24 hours at 70°F (21°C), 72 hours at 50°F (10°C) Easy hole-cleaning — no power-brushing required Suitable for use in dry or water-saturated concrete For best results, store between 45°F (7°C) and 90°F (32°C) Available in 8.5 oz., 22 oz. and 56 oz. cartridges for application versatility Manufactured in the USA using global materials SET-XP is code listed for installation with the Speed Clean™ DXS drill bits without any further cleaning (ICC-ES ESR-2508) Tested per ACI 355.4 and AC308 Applications Concrete: Cracked Concrete Block: Grouted Concrete Block: Hollow (Ungrouted) Seismic (New Construction) Seismic Retrofit Water / Wastewater Facilities