Finish paint PITTURA ANTIMUFFA

indooroutdoorfor exterior and interior walls

Water-based wall paint for the restoration of surfaces subject to mould formation. Description Easy-to-use water base single-component product based on acetovinyl copolymers. By evaporation of the water, a continuous film is formed, super washable, with good breathability, high hiding power and excellent resistance against the formation of mold. Uses Restoration of surfaces subject to the formation of mold. It can be pigmented with water-based pastes for water-based paints, in order to obtain light colors. Preparation of the support Very absorbent and prone to chalking walls should be consolidated with FRIBROPROTEX PRIMER. Cement-based substrates must be left to sesoning. To restore missing parts and smooth the surfaces, use COLORSIVIT RASANTE. On old paints, check the solidity of the substrate and then operate directly. Application PITTURA ANTIMUFFA must be applied in 2 stages, diluting with water (about 5-25%). Each substrate must be clean, dry, free from dust and mold residues. Consumption is approximately 0.10-0.16 l/m2 for each shot, depending on the absorption of the substrate.