Concrete primer FLEX A+B

for coatingsepoxypolyurethane

Elastic epoxy system Formulated with good elasticity, it can be used as a primer to consolidate damaged concrete supports or to make resin coatings for parking lots. When used as an impregnating agent for fiberglass, it allows to create fiberglass coatings. Description Two-component product based on epoxy-polyurethane resins, used in combination with amine hardeners.The system, in addition to carrying out a consolidating action for cls supports made of concrete, it has good elasticity. Use Primer for damaged cementitious supports. Primer for the construction of parking ots. Impregnations of fiberglass to make fiberglass coatings. Support The substrate must have a minimum compressive strength of 25 N/mm2 and a tensile strength of 1,5 N/mm2 Preparation of the support Operating on concrete funds. It is necessary to check that there is no rise in humidity. If the cls. It is newly built you will have to wait for full maturation. The surface must be solid, absorbent and free from the presence of oils, surfactants, water, dust. Any inconsistent parts will have to be removed. Flooring must be treated mechanically, by abrasiveness, shot peening or milling. Application At the time of application, combine part "A" and part "B" in a single container and mix carefully (for 2 minutes) using a mechanical stirrer. FLUIDEPOX FLEX can be applied in different ways: with trowel or blade, pure or loaded with QUARZO B0 roller, pure or diluted with 5% Ethyl Alcohol or Solvent UNI Consumption varies considerably according to the applications and the state of the subsoil.