Epoxy flooring CLEAR A+B

industrialliquidsmooth

Low yellowing epoxy compound to realize a "depth effect" to decorative surfaces. Suitable for castings of 2 mm. Description Solvent free Epoxy product with very low yellowing, and high gloss. Applied in castings with thicknesses of about 2mm, it hardens without shrinkage maintaining a smooth surface with perfect transparency and deaeration. Use "Depth effect" for decorative surfaces. Low thickness incorporation of artistic elements. Support The surface receiving the casting must be solid, dry, not polluted by oils, detergents, powders or other release substances. The temperature of the support must be >15°C. Preparation of the support On resinous flooring the perfect adherence of the coating must be verified; If so, abrasive and proceed to application. In case of casting on wood or porous surfaces, seal at best by applying a coat of COLORSIVIT EPOX CLEAR TIX. Application At the time of application, combine the components in a single container and mix slowly and homogeneously for at least two minutes. Carefully respect the ratio of mixture by weight. Pour the product on the surface to be coated with an optimal consumption of 2 kg/m2 to obtain a thickness of 2mm.Castings less than 1.5 mm thick are not recommended as the surface may show aesthetic defects. Castings greater than 2.5 mm thick are not recommended, which could compromise transparency. Immediately after casting it is possible to distribute the product on the surface by notched trowel. If necessary, pass the roller to even out the surface and facilitate the deaeration of the system.