Toilet tank CISTERN

With the TECE cistern both is possible. The flush pressure can be flexibly adapted to any toilet regardless of the ceramics used. With conventional drain valves, the flush pressure can only be subsequently curtailed, but not increased. By exchanging the throttle ring installed as standard, the flush pressure can be subsequently increased. If there is overspray, it can of course also be reduced. Saves water with dual-flush technology Use in dry-wall and brick-wall construction Easy assembly Almost always fits SAVE WATER WHEN POSSIBLE - FLUSH WELL WHEN NECESSARY! For years, leading ceramics manufacturers have been offering a special toilet bowl that can make do with a water-saving 4.5 litres for a full flush. As the appropriate dual-flush technology was not available, however, a single-flush system was used. As a result: flushing always required 4.5 litres of water, whatever the extent of one's "business", and the water saved through the full flush was wasted again. DON'T JUST REDUCE FLUSHING PRESSURE, INCREASE IT TOO. The flushing pressure can be flexibly adapted to the requirements of any toilet, regardless of the ceramics used. Example: After installing the toilet, the ceramic isn't flushed properly. With conventional drain valves, the flushing pressure can only be subsequently reduced, but not increased. The TECE valve has a solution for this: By exchanging the throttle ring installed as standard, the flushing pressure can be subsequently increased. Of course it can also be reduced if there's excess splashing.