Polyethylene raised floor pedestal ANC 80/130

high-resistancefrost-resistantfor patios

This riser pedestal is adjustable for heights of between 80 and 130 mm, and designed for tiled, ceramic or slab terraces intended for pedestrian use. Self-levelling riser pedestals can be used on uneven or irregular ground to compensate for - or create - a gradient of up to 5%, regardless ground characteristics. The CLEMAN® range allows you to prepare the site by pre-setting the riser pedestals using the driver bit, use the screw adjuster to set the riser pedestal height, and carry out the final millimetres of adjustment using the special adjustment wrench. Optimized lateral finishing : integration of 2 lateral riser support systems. A square flange makes it easy to lay paving at an angle. Acoustic rubber damper included. 4 mm divisible spacers (quantity 4) to make the installation easier. Optimised stability: all the riser elements are mounted together. A full dedicated related products range : extensions, side finishing plate, adjustment key and driver bit. Conforms to French regulation DTU 43.1. Strong resistance to crushing (higher than 1T) Self-levelling riser pedestals should be used only on uneven ground or existing concrete support. Lateral finishing can be done with the CLEMAN® side finishing plate. Please read our instructions. CLEMAN® riser pedestal can be used with all slab dimensions. Please use at least 1 riser pedestal/corner. Always follow paving manufacturer recommendations to ensure the suitability of paving products for use with riser pedestals and the number of risers per m2 to use. The paving used must be self-supporting class T7, T11 or F +.