ME317 is a single-sided adhesive reinforced paper tape. For the airtight bonding of overlaps in illbruck vapour barrier and membranes for interior use. Also for joints in OSB boards and as an air-seal tape for penetrations.
ME316 is a single-sided adhesive reinforced paper tape. For the airtight bonding of overlaps with ME003 vapour barrier membrane, used internally. Also for joints in OSB boards and as an air-seal tape for penetrations.
Fully compatible with all internal illbruck building protection products
Strong kraft paper
Easy to tear off by hand
Quick and easy application
Surfaces must be dry and free of oil, grease, dust and other
anti-adhesive components. Bonding to frozen surfaces is
not possible.The substrate must offer
sufficient load-bearing capacity. On porous or damp
substrates or at low temperatures, the use of primer ME904
is recommended.
Detach the release paper and place the tape centrally over
the joint (e.g. edge of overlapping membrane, or across
a panel joint) so that the minimum coverage onto each
substrate is 20 mm.
Gradually peel off the release paper and adhéré the tape
whilst keeping it tension-free and wrinkle-free.
To consolidate the bond apply firm pressure manually. Use
of a seam roller will further improve the adhésion in most
applications.