Outdoor sports flooring ACRYFLEX T™ CUSHION

acrylicpolymerrubber

Acryflex T Cushion Tennis Court Covering System is an International Tennis Federation (ITF) approved sports surface covering system that can be applied to concrete or asphalt surfaces, consisting of approximately 3 mm thickness, high-performance pure acrylic latex polymer-based components. Surface Preparation The concrete or asphalt surface designated for the ACRYFLEX T Cushion system must have completed a curing/drying period of at least 30 days and should not exceed 3% moisture content. There should be no level differences in concrete surfaces. Concrete surfaces must be cleaned from dust, oil, and cement residues, and no surface hardening products that would adversely affect adhesion should be used. Asphalt surfaces should be poured to a minimum thickness of 8 cm according to sports surface coating infrastructure standards, and the slope of the surface should not exceed 0.83%. Hairline cracks, joints, and damaged areas on concrete surfaces should be repaired and leveled with a cement + silica mixture mortar prepared with ACRYPATCH 367-C repair binder, and the surface must be thoroughly cleaned of any type of oil and oil derivatives. Another important point; concrete surfaces should be poured taking precautions against any moisture or water that may come from below, if necessary, effective barrier membranes, fibers, or chemical moisture barriers should be used.