Balanced ventilation unit TWINFRESH COMFO RA1 V.3

heat-recoveryresidentialfor home

The TwinFresh Comfo user-friendly ventilator ensures fresh and clean air with a comfort level of humidity in your house. Many units can be connected to one network. The ventilator can operate in a passive supply mode: the air shutters are open providing a natural air flow. The design of the unit allows easy maintenance of the ventilator. - - - The humidity threshold in the room can be controlled by choosing one of three modes on the remote control. Night mode The ventilator switches to the first speed in the dark time of the day. Easy mounting of the mounting plate by means of magnets. - Night mode The integrated light sensor sends a signal to switch the ventilator to low speed mode. - Speed switching - Passive air supply In this mode the shutters are open, but the fan does not operate. - Air supply In this mode all ventilators will operate in supply mode irrespective of the maximum air supply setting. - Ventilation All the ventilators in the network operate in permanent air extract or air supply mode. To ensure balanced ventilation at the stage of installation it is advisable to set one half of the ventilators to air supply mode and the other part of the ventilators to air extract mode. - Ventilation with heat recovery - Humidity control mode selection The ventilators can be connected into one network for centralized control. The signals from the control panel and the remote control, as well as from the humidity sensor, are received only by the master (main) ventilator. Maximum ease of installation – mount into the wall, plug in and use. High efficiency – up to 90 %.