Flat roof skylight RIDGELIGHT WITH BEAMS

double-glazedwith skylight frameglass

A dual pitched rooflight installed at a 5° angle with supporting beams Flat roof type Flat roofing material Opening width in roof min./max. 1.8-6.2 m (for venting modules 1.8-5.0 m) Rooflight installation pitch 5° Ensures maximum daylight and thermal comfort Adds spaciousness to the area below Totally self-supporting solution The Ridgelight at 5° is a self-supporting structure comprised of two rows of skylights with beams supporting the module sides. The modular Ridgelight at 5° with beams is the ideal solution for large roof openings, bringing daylight into galleries, circulation areas and small internal courts. The Ridgelights add to the look and feel of the room and create an illusion of a small glass roof. VELUX modular skylights are delivered with a 10-year guarantee on modules and flashings. VELUX skylight specialists offer support throughout design, specification and installation, including design of the sub-construction needed for installation. Please note that sub-constructions are not included in the VELUX delivery. VELUX modular skylights require the following minimum and maximum measurements: Module width: 675-1000 mm Module height: 600-3000 mm Comfort venting VELUX Modular Skylights meet the requirements of the harmonised standard EN 60335-2-103(2015). Therefore, comfort venting skylights can be installed within reach, i.e. at installation heights below 2.5 m above floor level (inside) and ground level (outside). We recommend that you observe national regulations and consider if the planned specific use of the building requires additional safety measures that must be applied by the installer/user to prevent serious injury.