Vinyl floor covering WATCO VYNACOAT

smoothtile looknon-slip

Transforms and protects drab, faded vinyl Provides an easy clean, slip resistant surface Excellent resistance to UV and fading Only one coat usually required Superior abrasion and chemical resistance Watco Vynacoat is a tough two part resin coating especially designed for applications onto vinyl or lino. Worn, stained, faded vinyl can be given a new lease of life and the coatings’ fine texture makes wet, slippery areas safer. If the vinyl is in good decorative condition but just slippery, the clear version retains the appearance but makes it safe. Just one coat of the clear version is usually sufficient, two coats of the coloured version may be required, especially on darker surfaces. When applying onto a textured surface or into temperatures below 0°C, it is important that the product is ‘worked’ out over the 25m² area as it can become harder to apply in these situations. Features Gloss, anti slip clear or coloured finish Polyaspartic formulation has excellent resistance to UV and fading Excellent abrasion and chemical resistance Only one coat usually required Will not taint food EN71/3 certification as a non-toxic product Properties - Anti slip, polyaspartic. Suitable for - Vinyl, linoleum Finish - Glossy, textured Interior or Exterior - Interior Primer required - No primer required when using on vinyl surfaces. Composition - 2 part polyaspartic resin Coverage - 25m² per 2.5L per coat Number of coats - 1 Dry film thickness - 100 microns Curing time - 8 hours at 20°C Minimum application temperature - Minus 10°C Pot life - 25-30 minutes at 15°C. Higher temperatures will shorten this working time.