Liquid epoxy resin floor covering SAFETY COAT FOOD SAFE

smoothconcrete looknon-slip

A safety surface certified for use in food storage areas Meets requirements for EN14/3 (Food taint test) Excellent abrasion and UV resistance Can be applied at a temperature range of minus 10-30°C Watco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10ºC) where other conventional paints will fail to dry. This is an anti slip version of Watco Food Safe Coating Recommended areas of use Food preparation environments Cold food storage such as walk-in fridges Areas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfaces Features Tested to EN71/3 as a non-toxic product Takes heavy wear and tear Fast curing, re-coatable in only 5 hours Can be applied between -10ºC and 30ºC Slip resistant Excellent chemical resistance Steam cleanable Suitable for - Concrete, old asphalt/tarmac, well bonded paint, some metals, wood Finish - Glossy, fine textured Interior or Exterior - Interior and exterior Composition - 2 part polyaspartic resin Coverage - 25m² per 2.5L per coat Number of coats - 2 Dry film thickness - 85 microns Curing time - 6 hours at 20°C Minimum application temperature - Minus 10°C Pot life - Up to 25-30 minutes at 15°C.