Gas air heater XR 100+

ceiling-mountedwall-mounted

Improved efficiency Heating and air circulation Economical energy consumption Quick warm up Reliable design The XR 100+ is an unit air heater with axial fan, especially suitable for high (>6m) and large industrial buildings. The unit has a capacity of 100 kW and does not need a condensate siphon. The pre-mix burner and the system fan both have stepless modulation down to 60% output. These features ensure a constant and even temperature in the building. modulating premix burner and fan delta T-control optimizes energy consumption vertical air discharge possible summer ventilation compact and low weight available in natural gas or propane version installation friendly no condensate drain necessary simple maintenance controller can operate up to 8 heaters other controling possibilities: 10V. and modbus Nominal power 86.1kW Nominal load lower value 91kW Efficiency 96% Air volume 10200m³/h - 10700m³/h Max. throw horizontal 53m Max. throw vertical 0m Supply voltage 230V Nominal current 3.5A Max. electric power input 760W Max. sound level (at a distance of 4 metres) 63.94dB(A) Material heat exchanger Stainless steel Closed version Yes Burner controller high/low No Burner controller, modulating Yes Control signal on/off Yes Control signal 0-10 V No Fan type Axial Degree of protection (IP) IP20 Height 1040mm Width 1135mm Depth 1090mm Weight 195kg Min. mounting height (horizontal air distribution) 2.7m Outer pipe diameter combustion air 100mm Seasonal space heating energy efficiency (Ns) 78.1% Connection, fuel Internal thread Nominal diameter fuel 1 inch (25) Gas consumption high-calorific natural gas (G20) 9.6m³/h