|
|
Available from 3kW - 72kW
The tank and elements are made from 316 grade S/S
All have a control thermostat for temperature settings and an overheat thermostat
Delivered in colour coded cartons for easy shipping
All models are fish safe
|
|
|
|
|
|
The Certikin Genie range of condensing gas pool heaters is one of the worlds only condensing pool heaters. Following the unprecedented success of the initial launch of the Genie boiler and acting on constructive feedback from the trade, the Genie now features a water to water heat exchanger with cupro nickel tubes. This means that even if you are struggling to maintain perfect water balance, the Genie is robust enough to cope. Still using condensing technology, the Genie range delivers up to a fantastic 94% efficiency compared to standard direct fired pool heaters which typically operate at between 60 to 80% efficiency.
Features
Available in 36kW (123,000 btu) and 49kW (167,000 btu) outputs
Only one unit to stock for either natural or LPG - supplied natural gas with a conversion kit to LPG included
Tamper proof lockable pool temperature display in C or F
Up to 94% condensing efficiency - equivalent to Sedbuk A
Running cost reduced by up to 30%
Environmentally friendly
Modulating output for accurate temperature control and increased efficiency
IP44 for indoor or outdoor installations
Quiet running
Lightweight compact design
Pool connection left to right OR right to left
Simple condensate disposal connections left or right hand side
Pre-plumbed c/w a double non-return valve and filling loop
Plastic flue kits, push fit horizontal and/or vertical up to 20m
Honeywell CVI controls
Muliple heater kit options up to 400kW output (8 heaters)
CCP pool control panel compatible
Wall mounting kit available
Commissioning / diagnostic display with service indicator (2000 hrs run time)
Suitable for use with salt chlorinated pools
|
|
Ultra-high performance in a compact, quiet, and eco-friendly design
MasterTemp® Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more fast heat-up, compact design, super quiet operation, easy to use, and eco-friendly.
An Eco Select™ Choice: MasterTemp® Heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Heats up fast so no long waits before enjoying your pool or spa
Best-in-class energy efficiency
Manual gas shut-off when service is required
Eco-friendly MasterTemp® is certified for low NOx emission and outperforms industry standards
Rotating digital display allows for easy viewing
Tough, rustproof exterior handles the heat and weathers the elements
|
|
|
|
|
|
Get that warm-all-over feeling
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas® rust-proof construction with plastic manifold and PVC union connections. Heavy-duty unit with cupro-nickel exchanger stands up to the harshest of applications, like low pH, high flow or heavy use.
An Eco Select™ Choice: Max-E-Therm® high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Lightweight - Lightest heater in its class
Compact Design - Ideal for retro-fit installation
Easy to Switch - Change gas sources with installation of separate orifice
Environmentally Friendly - All units are low NOx
Rustproof Housing Sleek, matte black enclosure is made of{PROD:Dura-Glass - an exclusive Sta-Rite material that handles the heat and weathers the elements
Lower Operating Costs - 84% efficiency rating - rated 1st in its class for highest energy efficiency
Custom or Retrofit - Direct-connects to Sta-Rite System:3® Mod Media filter or easily fits other systems
|
|
|
Electric heater 1,5-3,0 kWPahlén electric heater is designed for continuous flow with the lowest possible pressure drop. The compact dimensions make it suitable for spa pools, small swimming pools and installation in restricted spaces. The heater is manufactured from acid-proof stainless steel AISI 316. It is available in three sizes of 1,5 kW, 2,0 kW or 3,0 kW and is fitted with an adjustable thermostat 0-45°C together with automatic over heating protection.
|
|
¬ Swimming pool heating installation. It uses night rate electricity in hotel complexes, sports centres, clubs, private homes, buildings, and so on.
¬ This energy is the most economical, safer, reliable and the least polluting.
¬ Maximum heating time is 8 hours (23h-7h is the normal night rate tariff). If you heat up for 24 hours a day, you should divide by 3 the power shown on the table.
¬ This is the consumption during the coldest day. The rest of the time, the consumption will be lower than the one shown on one on the table.
¬ The information appearing in "Technical data" is only valid for outdoor swimming-pools when the outside temperature is not below 15ºC.
|
|
| ... products without information |
| |
Ultra-high performance in a compact, quiet, and eco-friendly design
MasterTemp® Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more fast heat-up, compact design, super quiet operation, easy to use, and eco-friendly.
An Eco Select™ Choice: MasterTemp® Heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Heats up fast so no long waits before enjoying your pool or spa
Best-in-class energy efficiency
Manual gas shut-off when service is required
Eco-friendly MasterTemp® is certified for low NOx emission and outperforms industry standards
Rotating digital display allows for easy viewing
Tough, rustproof exterior handles the heat and weathers the elements
|
|
|
|
|
|
Get that warm-all-over feeling
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas® rust-proof construction with plastic manifold and PVC union connections. Heavy-duty unit with cupro-nickel exchanger stands up to the harshest of applications, like low pH, high flow or heavy use.
An Eco Select™ Choice: Max-E-Therm® high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Lightweight - Lightest heater in its class
Compact Design - Ideal for retro-fit installation
Easy to Switch - Change gas sources with installation of separate orifice
Environmentally Friendly - All units are low NOx
Rustproof Housing Sleek, matte black enclosure is made of{PROD:Dura-Glass - an exclusive Sta-Rite material that handles the heat and weathers the elements
Lower Operating Costs - 84% efficiency rating - rated 1st in its class for highest energy efficiency
Custom or Retrofit - Direct-connects to Sta-Rite System:3® Mod Media filter or easily fits other systems
|
|
¬ Swimming pool heating installation. It uses night rate electricity in hotel complexes, sports centres, clubs, private homes, buildings, and so on.
¬ This energy is the most economical, safer, reliable and the least polluting.
¬ Maximum heating time is 8 hours (23h-7h is the normal night rate tariff). If you heat up for 24 hours a day, you should divide by 3 the power shown on the table.
¬ This is the consumption during the coldest day. The rest of the time, the consumption will be lower than the one shown on one on the table.
¬ The information appearing in "Technical data" is only valid for outdoor swimming-pools when the outside temperature is not below 15ºC.
|
|
|
|
see the results for the following category : 
