The Comfort circular unit heaters, for ceiling installation only, are especially suitable for high rooms, even if the optimum ratio between the air flow-rate and the heat output make them suitable for any manufacturing environment. The large heat exchange coil and the fan downstream of the coil ensure optimum mixing of the air in the environment, meaning less stratification of the hot air than with traditional unit heaters. Four different diffusers ensure perfect control of the air flow, with the possibility on the more common diffusers to tilt each louvre in the desired direction.
The Comfort unit heaters are made in 10 sizes, with heat outputs from 17 to 107 kW, and one or two speeds motors.
The casing is made of spun steel on both top and bottom sections and is designed to give
greater strength and quiter operation. The casing is then phosphatised and finished with an epoxy polyester powder coating of light grey, RAL 9002, thus ensuring its continued attractive appearance.
The circular heat exchanger of the “COMFORT SABIANA”
unit heater is constructed of copper tubes
with aluminium fins. The supply and return connections
are located on the top and bottom of the unit
respectively and are positioned on the same side
for simplicity of installation.
The helicoidal fan is statically and dynamically balanced,
the rational high-capacity profile provides
maximum air volume with a minimum power consumption.
Four eye bolts are provided on the unit
for suspension by means of chains or tie-rods.
These can also be used
for more permanent bracketry of the customers’ choice.