|
|
This new popular design element vertically mounts to the façade and gives the architect the opportunity to focus not only on solar control and privacy, but also on the façade’s visual enhancement. Sliding Shutters are manufactured from high quality
materials and are suitable for many different types of buildings. Sliding shutters can be integrated into a project during the early design stages.
SLIDING SHUTTERS
• The fins in the aluminium extruded frame are available in two materials,
aluminium and Western Red Cedar wood
• A variety of 6 fins of different shapes, 5 in aluminium and 1 in Western
Red Cedar
• Finishing options:
- Aluminium frames and fins can be anodized or powder coated in a wide
range of colours
- Western Red Cedar is a durable wood, which can be used untreated or
oiled
• Frames, which form the casing of the shutter and carry the fins, vary in
dimension depending on the wind loads and fin type
• Fins can be applied in either a fixed or an adjustable configuration
• Top and bottom rails, runners and necessary hardware are part of the
system
• Various rail brackets permit easy installation
• Custom fillings:
- Stretch Metal
- Glass
- Fabric
- Perforated sheet |
|
The shutters have a slim top and bottom rail mechanism. Completing the system with top runners, bottom runners and end stop, ensures smooth running at all times.
Various aluminium extruded or Western Red Cedar wooden fins are fitted in this frame with Hunter Douglas® proprietary parts. The centre to centre distance between the fins may be varied to achieve the required shade angle or to allow more natural daylight into the building interior. |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
Extrusion-moulded aluminium cavity profile 70/30mm
SHEET METAL
Edged aluminium sheet, 2mm single-edged; riveted at the side, model SL-punched hole: circle (20mm), Right-angled (20 x 20mm), special forms upon request
FUNCTION, APPLICABILITY
Protection against warmth and light irradiation. Non-fading, colour-fast, water-repellent surface
SLIDING SHUTTER MODELS
For manual metal or wooden sliding shutters which can also be mechanised. Sliding shutters combine modern architecture with timeless beauty. Whether for private residences, business or industrial property, the sliding shutter integrates itself seamlessly in the façade design.
The sliding shutter with rounded aluminium with perforations of your choice |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
Extrusion-moulded aluminium cavity profile 70/30mm
SHEET METAL
Edged aluminium sheet, 2mm single-edged; riveted at the side, model SL-punched hole: circle (20mm), Right-angled (20 x 20mm), special forms upon request
CORNER JOINT Aluminium corner-angle, double beaded
STRIKE STRIP
Available in T-, rubber and brush seal strike strip; can either be fitted or delivered separately
MEASUREMENTS
Minimum size: width 250mm
height 250mm
Maximum size: width 2000mm
height 3000mm
SLIDING SHUTTER MODELS
For manual metal or wooden sliding shutters which can also be mechanised. Sliding shutters combine modern architecture with timeless beauty. Whether for private residences, business or industrial property, the sliding shutter integrates itself seamlessly in the façade design.
The sliding shutter with rounded aluminium without perforations |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
Extrusion-moulded border profile 40/40mm; Optionally with rebated moulding
COVERING Soltis fabric (Polyester, PVC) 92 or 86
MEASUREMENTS
Minimum size: width 325 mm
height 390 mm
Maximum size: width 1800mm
height 3500mm
FUNCTION, APPLICABILITY
Protection against warmth and light irradiation
Non-fading, colour-fast, water-repellent surface
SLIDING SHUTTER MODELS
For manual metal or wooden sliding shutters which can also be mechanised. Sliding shutters combine modern architecture with timeless beauty. Whether for private residences, business or industrial property, the sliding shutter integrates itself seamlessly in the façade design.
The sliding shutter with a fabric covering |
|
SURFACE
Shiny RAL powder-coating, matt structure, matt, VSR, NCS; wood décor is possible. Coating after assembly, burned-in at 200°C
FRAME
MR-profile 40x30 + L-profile 40x20x3 optional with folding border
LAMELLAE Wooden lamellae from knot-free larch, un-treated, 92x15mm
MEASUREMENTS
Minimum size: width 325mm
height 390mm
Maximum size: width 1800mm
height 4000mm
with vertical middle piece from ca. 1800mm
FUNCTION, APPLICABILITY
Protection against warmth and light irradiation
Non-fading, colour-fast, water-repellent surface
SLIDING SHUTTER MODELS
For manual metal or wooden sliding shutters which can also be mechanised. Sliding shutters combine modern architecture with timeless beauty. Whether for private residences, business or industrial property, the sliding shutter integrates itself seamlessly in the façade design.
The sliding shutter available with wooden or aluminium lamellae |
|
... see all the products in the category
Shutters
|
|
|
