Plasterboards

33 companies | 236 products

The installation of dry lining systems is uncomplicated. The handling and the integration of plasterboard walls and its substructure is very easy. Architects and building owners save a huge amount of time because of the non-existing drying periods. Both are adaptable on different wall thickness, without any visible boltings. The room partition with Lindner Vitrum and Planum combines high energy efficiency...

{{productDetail[5731]}}

With a thickness of 25 to 30m, these rebated semi-circular cladding in variable demensions...

The range of GEOFLAM® products allows the assembly of ventilation and smoke extraction ducts with an EI (fire resistant) of 60 to 180. The entire GEOFLAM® range is tested according to EN 1366-1 and 1366-8 (interior sections: 0x0 to 2500x2000 mm).

Our products are...

The range of GEOFLAM® products allows the assembly of ventilation and smoke extraction ducts with an EI (fire resistant) of 60 to 180. The entire GEOFLAM® range is tested according to EN 1366-1 and 1366-8 (interior sections: 0x0 to 2500x2000 mm)
...

Elements in molded gypsum, armed...

{{productDetail[123807]}}

Insulated plasterboard for plaster dab / adhesive bonded dry-lining

Thermal conductivity
(insulant thickness) 0.022...

Insulated plasterboard for mechanically fixed dry-lining

PROPERTIES

Thermal conductivity
(insulant thickness) 0.022...

{{productDetail[59603]}}

Gypsum board for sound absorption with air cleaning effect

Linear panels have a surrounding stepped edge for precise laying without joint filling, as well...

Used in all fields of interior works as cladding of premium drywall systems with enhanced requirements for sound insulation and fire protection, and in case of special requirements on mechanical...

High density gypsum fibre elements
With dimension 1200x600 mm or 600x600 mm, thicknesses 25, 28, 32 and 38 mm, surrounding tongue...

Knauf Safeboard Joint Filler is used with Knauf Safeboard X-ray shielding plasterboard to complete the radiation protection.

Properties and added value:
Suitable...

Sound shield board is used in all fields of interior works as cladding or upgrade of drywall systems with fire resistance and in case of highest...

{{productDetail[50767]}}

Fire protection for structural steel columns and beams

Performance

Fire

Knauf Fireboard is non-combustible to BS 476: Part 4: 1970 (1984) and Class 1
Surface Spread of Flame to BS 476: Part 7: 1997. Knauf Fireboard complies with the Class O requirements of the Building Regulations when tested to BS 476: Part 6: 1989 and Part 7: 1997.

Description

Knauf...

{{productDetail[59601]}}

GlasRoc® Brand Sheathing offers:

Long term protection to weather exposure.

A superior water-resistant surface that does not inhibit water vapor permeance.

Excellent fire resistance properties, and numerous...

Same use as Exterior Gypsum Soffit Board plus a specially formulated core for use in fire-resistive designs.
ProRoc® Exterior Soffit Board, ProRoc® Exterior Soffit Type X and ProRoc® Exterior...

AirRenew® indoor air quality (IAQ) gypsum board product line expands to include abuse-resistance.
AirRenew’s innovative technology enhances the air quality of interior environments by permanently reducing VOCs, particularly formaldehyde, circulating in the air. AirRenew takes VOCs out of the air and converts them...

AirRenew® indoor air quality (IAQ) gypsum board product line expands to include impact-resistance.
AirRenew’s innovative technology enhances the air quality of interior environments by permanently reducing VOCs, particularly formaldehyde, circulating in the air. AirRenew takes VOCs out of the air and converts them into...

AirRenew®. The only gypsum board that clears the air.
AirRenew® Gypsum Board is for use in interior walls and ceilings and is specially...

{{productDetail[59022]}}

Be sure that high-traffic areas will resist bumps and bruises with strong, solid, and durable, gypsum-fiber panels designed to outperform...

This product is designed specifically for the direct application of veneer plasters and comes in a...

Designed for the low-cost application of conventional plaster...

SHEETROCK FIRECODE C Core gypsum panels provide improved fire protection over standard FIRECODE panels due to additives that enhance the integrity of the core under fire exposure. Comply with Type...

Introducing the first and only certified sag-resistant lightweight wallboard that is ICC certified for both walls and ceilings.

SHEETROCK®...

{{productDetail[59672]}}

PRODUCT DESCRIPTION
The Tecnoboard system consists of thick fiber-reinforced plaster panels, with perfectly smooth surfaces on both sides. The edges are shaped in order to fit...

{{productDetail[60351]}}

Description

Gold Bond® BRAND Gypsum Board panels consist of a fire-resistant gypsum core encased in heavy natural-finish, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce and protect the core, and the ends are square-cut and finished smooth. For speed of installation, GridMarX® guide marks are printed on the paper surface.

Long...

Description

Gold Bond® BRAND High Strength LITE® is a specialty gypsum board that is formulated to be 25% lighter than original 1/2" High Strength Gypsum Board. The result is a superior board that is lighter in weight, sag resistant and easier to handle.

Basic Uses

High Strength LITE can be...

Description

Gold Bond® BRAND 1/2" High Strength™ Ceiling Board is a specialty gypsum board encased in 100% recycled paper with increased uniformity and integrity of its gypsum core, making its sag resistance equivalent...

Description

Gold Bond® BRAND Fire-Shield C™ Gypsum Board panels have a specially formulated Type X core to achieve superior performance when used in specific fire-rated Type C assemblies.

Long edges of the panels are tapered or square. Tapered edges allow joints to be reinforced with ProForm® BRAND Joint Tape and concealed with ProForm®...

Description

Gold Bond® BRAND High Strength Fire-Shield® LITE® Gypsum Board panels consist of a fire-resistant Type X gypsum core specially formulated to be 15% lighter than standard Type X gypsum board. High Strength Fire-Shield LITE is encased in heavy natural-finish, 100% recycled paper on the face and back sides. The face paper is folded around the long edges to reinforce...

{{productDetail[61718]}}

Gypsum board combined with a EPDM high-mass layer of 5,5 kg/m2, sound-insulating and anti-vibration.

CE...

Gypsum board combined with a Ecorubber panel (vulcanised rubber agglomerated panel), sound-insulating and anti-vibration....

Gypsum board combined with a pure lead layer with variable thickness from 0.5 up to 4...

MATERIAL
Akustik - Gips Art. 5 is the plasterboard coated on one side with...

MATERIAL
Akustik -Gips Art6 is a special plasterboard with a polyethylene/lead layer (Akustik Metal...

{{productDetail[55063]}}

For additional information about tested and standards related to mold and moisture resistance, refer...

DensArmor Plus Abuse-Resistant Interior Panel is the first fiberglass mat abuse-resistant...

DensGlass® Shaftliner is a premium 1" Type X gypsum panel (per ASTM C 1658) backed on both faces with coated fiberglass mat. This architecturally...

ToughRock® gypsum board is an interior drywall material used for walls and ceilings in new construction or renovation...

ToughRock® Fireguard® and Fireguard C® gypsum boards are Type X (as defined in ASTM...

{{productDetail[61709]}}

Plusboard - This Styrofoam/plasterboard laminate was developed as the answer to the requirement for high-quality, internal wall insulation. It is applied to the inner...

{{productDetail[99172]}}

For use with the GTEC Acoustic Homespan Partition System. It Complies with BS 1230 Type 1 and...

For use with the GTEC Acoustic Homespan Partition System when superior moisture resistance is required. Standards Complies with BS 1230 Type 3 and BS EN...

The UKs first gypsum based board for use in high humidity or wet applications. Ideal as a tile backing board for bathrooms, can also be used as an external sheathing board. The board complies...

A 4 foot long ceiling board ideal for skim plastering. Sold in complete pallets only. It complies with BS 1230 Type 2 and 6 and BS...

A strong, light-weight and flexible 6mm board for creating curved walls and ceilings. The board Complies with BS 1230 Type 1 and...

{{productDetail[99644]}}

CanBerra Laminate Plasterboards create a new reference standard in partitioning finishes. Using the finest components, they are made from either 9.5mm, 12.5mm or 15mm high-quality plasterboard substrate, faced with...

CanBerra Vinyl Plasterboards offer a huge choice of decorative finishes in hard wearing materials, together with a bespoke application service, allowing you to supply your own...

{{productDetail[63471]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With ArchiExpo you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation