|
|
All Pahln compact electric heaters can be supplied from 3,0 to 18,0 kW with outer jacket made of titanium and Nic-Tech treated heating element. The electric heaters are designed for swimming pools with aggressive water, where there is a high risk for corrosion or large quantities of chlorides present, i.e. in pools with salt water, where a salt chlorinator is installed and also in industrial processes.
When ordering, use the item no. for compact electric heaters of acid-proof stainless steel, page 51-52, and add a %u201DT%u201D after the item no.
Example:
Item no. 133111T= Electric heater compact made of titanium with a Nic-Tech treated heating element
3 kW, unipolar thermostat 0-45C and flow switch.
Dimensions, installation, pressure drop and electrical data are identical to compact electric heaters of acid-proof stainless steel.
|
|
Pahln air heater for spa pools heats the incoming cold air before it is mixed with the water. It is made of acid-proof stainless steel
AISI 316 and is supplied with hose connections. The air heater is equipped with an adjustable thermostat 30-80C and overheating
limit control.
|
|
Pahln electric heaters connected in series are designed for continuous flow with the lowest possible pressure drop.
These heaters may be used in a variety of water heating applications. The outer jackets are made of acid-proof stainless steel AISI 316 and they are connected by union couplings made of brass.
The heaters are supplied with a 2%u201D heating element of Incoloy 825, a high alloy steel with excellent characteristics against aggressive water. The electric heaters connected in series are used for larger installations. Maximum pressure: 10 bar.
|
|
|
Pahln electric heaters 3,0-18,0 kW made of plastic are designed for a continuous flow with the lowest possible pressure loss. The compact design enables installation where there is little space. The outer jacket and the junction box are made of plastic and the heating element is made of Incoloy 825. The heater is supplied with union couplings for adhesive bonding of 50 mm pipes. All heaters are equipped with thermostat 0-45C, overheating limit control 60C and flow switch.
|
|
Pahln have developed a new series of electric heaters with digital control, where the desired pool temperature can easily be set and the current pool temperature is shown in the LED display.
In addition to an overheating protection and a flow switch, the heater has built-in contactors, that simplifies the connection of the heater.
The heating element is made of Incoloy 825 or titanium ASTM grade 1 and the casing of the heater is made of glassfibre reinforced polypropylene.
The Aqua HL line heaters are available with outputs in sizes from 3-15kW up to 415V (230V 1-phase, 400/415V 3-phase) and are supplied with union couplings for bonding to 50 mm pipes.
The minimun flow is 90 l/min. Max. pressure: 2 bar.
|
|
Pahln electric heater Maxi Heat with digital control is a compact and effective heater for swimming pools. The desired pool temperature is easily set and is shown in the LED display. The heater is equipped with thermostat, overheating limit control and flow switch as well as automatic circuit breaker for protection.
Maxi Heat has built-in contactors (Siemens, +70C surrounding temperature),
that simplifies the connection of the heater. The materials used are powder
coated zinc sheet and glass-fibre reinforced polypropylene.
The heating elements are made of Incoloy 825 or titanium ASTM grade 1.
Titanium is recommended for swimming pools with aggressive water, where
there is a high risk for corrosion or large quantities of chlorides present, i.e. in
pools with salt water or where a salt chlorinator is used.
The heaters are equipped with 2%u201C connections.
The minimum flow is 170 l/min. The maximum flow is 300 l/min.
Max pressure: 2 bar.
|
|
|
|
|
|
The Certikin Genie range of condensing gas pool heaters is one of the worlds only condensing pool heaters. Following the unprecedented success of the initial launch of the Genie boiler and acting on constructive feedback from the trade, the Genie now features a water to water heat exchanger with cupro nickel tubes. This means that even if you are struggling to maintain perfect water balance, the Genie is robust enough to cope. Still using condensing technology, the Genie range delivers up to a fantastic 94% efficiency compared to standard direct fired pool heaters which typically operate at between 60 to 80% efficiency.
Features
Available in 36kW (123,000 btu) and 49kW (167,000 btu) outputs
Only one unit to stock for either natural or LPG - supplied natural gas with a conversion kit to LPG included
Tamper proof lockable pool temperature display in C or F
Up to 94% condensing efficiency - equivalent to Sedbuk A
Running cost reduced by up to 30%
Environmentally friendly
Modulating output for accurate temperature control and increased efficiency
IP44 for indoor or outdoor installations
Quiet running
Lightweight compact design
Pool connection left to right OR right to left
Simple condensate disposal connections left or right hand side
Pre-plumbed c/w a double non-return valve and filling loop
Plastic flue kits, push fit horizontal and/or vertical up to 20m
Honeywell CVI controls
Muliple heater kit options up to 400kW output (8 heaters)
CCP pool control panel compatible
Wall mounting kit available
Commissioning / diagnostic display with service indicator (2000 hrs run time)
Suitable for use with salt chlorinated pools
|
|
Available from 3kW - 72kW
The tank and elements are made from 316 grade S/S
All have a control thermostat for temperature settings and an overheat thermostat
Delivered in colour coded cartons for easy shipping
All models are fish safe
|
|
Boiler rooms with exchangers for pools from 36 to 300 kw
Boiler rooms SKP (SuperKit Pool) associate an electric boiler with a plate heat exchanger out of STAINLESS 316L.
The heaters not being in contact with water of pool, these boiler rooms can be installed on all types of basin without fearing corrosion.
For a water treatment by salt or sea water. an exchanger TITANIUM can be built-in on demand (consult to us for specific).
Power and reliability...
The determination of boiler rooms SKP is always the subject of a particular study according to the data communicated to our research department.
The delivered apparatuses are thus "ready to pose" and easy to implement.
Equipment:
Plate heat exchanger STAINLESS 316L Controller of flow
Electric connection: SORTING 400 V
|
|
|
|
|
|
Get that warm-all-over feeling
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas rust-proof construction with plastic manifold and PVC union connections. Heavy-duty unit with cupro-nickel exchanger stands up to the harshest of applications, like low pH, high flow or heavy use.
An Eco Select Choice: Max-E-Therm high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Lightweight - Lightest heater in its class
Compact Design - Ideal for retro-fit installation
Easy to Switch - Change gas sources with installation of separate orifice
Environmentally Friendly - All units are low NOx
Rustproof Housing Sleek, matte black enclosure is made of{PROD:Dura-Glass - an exclusive Sta-Rite material that handles the heat and weathers the elements
Lower Operating Costs - 84% efficiency rating - rated 1st in its class for highest energy efficiency
Custom or Retrofit - Direct-connects to Sta-Rite System:3 Mod Media filter or easily fits other systems
|
|
Ultra-high performance in a compact, quiet, and eco-friendly design
MasterTemp Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more fast heat-up, compact design, super quiet operation, easy to use, and eco-friendly.
An Eco Select Choice: MasterTemp Heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Heats up fast so no long waits before enjoying your pool or spa
Best-in-class energy efficiency
Manual gas shut-off when service is required
Eco-friendly MasterTemp is certified for low NOx emission and outperforms industry standards
Rotating digital display allows for easy viewing
Tough, rustproof exterior handles the heat and weathers the elements
|
|
Pahln electric heaters for spa pools and small swimming pools are designed for continuous flow with a minimum pressure loss. The compact design enables installation where there is little space. The heater is made of plastic with a heating element of Incoloy 825, a high-alloy steel with excellent characteristics against aggressive water.
The heater is available in three sizes, 1,5kW, 2,0kW and 3,0kW. 230V, single phase. Max. pressure: 1 bar.
Item no. 141650-52 are equipped with adjustable thermostat 0-45C, overheating limit control 60C and flow switch.
Item no. 141653-55 are delivered with overheating limit control 60C and flow switch.
|
|
Indoor Pool Conditioner operates by dehumidifying the pool room area and returning the latent heat back to the pool water. Properly sized units will provide enough excess heat to condition the air in the pool room. An integral plenum heater attachment will also bring the pool up to temperature without an auxiliary source of heat.
The Boreal PC unit performs three functions in an enclosed pool area.
1. Dehumidify pool area
2. Heat the pool water
3. Heat the pool air
The prime purpose of the Boreal pool conditioner unit is to maintain proper humidity levels in the pool room. During this operation the unit also supplies heat to the pool room and the pool water.
|
|
Sofath pool heating: Increase the pleasure decrease the costs. Sofath geothermal heating is also available in an integrated package to heat your swimming pool.
The thermal heat exchanger uses your geothermal heating to provide an agreeable water temperature and a longer bathing season with all the cost advantages of geothermal.
|
|
Gasketed plate heat exchanger transfers heat between two fluids. For use in residential, commercial, industrial and healthcare applications.
Capacity: 5 to 5000 kW
Nine models available
Liquid flow rates: up to 800 m/h
Temperatures: up to 200C
Pressure: up to 25 bar
|
|
Fiberpool.Eu offer a high quality Heat exchanger SET for pools.
It contains:
Stainless steel heat exchanger of 40 kw, 60 kw, 75 kW, 120 kw
Solenoid valve with VITON (for hot water)
Circulator pump
Electronic thermostat with connector for standard pool pipe 50 mm
Very good SET - no need additional parts.
Shows current pool temperature.
|
|
The TRANSFER group ensures the calorific exchange between the existing boiler and the circuit pool by using the technology of the plate heat exchanger.
It is connected to the circuit heating like a radiator.
It controls the temperature of the water of the basin thanks to its regulator - digital posting.
Heat your pool with your boiler of central heating!
If the temperature of comfort is not reached, it gives the order of heating the boiler. As soon as the desired temperature is reached, it stops the operation of the boiler and the hot water circulation in the exchanger.
Equipment:
Plate heat exchanger: - STAINLESS 316L (Treatment chlorinates)
- or TITANIUM (treatment salt)
Plug seals for catch 230V + ground
Auxiliary contact of order burner boiler
Auxiliary contact of control to filtration
Primary education Circulator
Anti return valve
Blowoff valve
Secondary
Regulator with digital posting with probe
|
|
Specially designed for pool water heating, available both in AISI 316
stainless steel with mirror finishing and - for some sizes - in silver coloured
lacquered titanium.
Electro-welded outer body with water flow coil and control drain for
temperature measuring
Max operating pressure:
- Heating circuit 10 bars
- Pool circuit 3 bars
|
|
Pahln Maxi-Flo is a well-tried and tested heat exchanger with effective heat transference capabilities. It is intended for swimming pools
and other applications where there is a demand for high capacity together with a low-pressure drop.
All models can be installed together with boilers, heat pumps, solar panels or other heat sources.
These heat exchangers are light and compact. The material used is acid-proof stainless steel AISI 316. Stainless steel adjustable fixings are included.
Maximum pressure: Primary 10 bar %u2013 Secondary 10 bar.
|
|
Pahln Maxi-Flo is a well-tried and tested heat exchanger with effective heat transference capabilities. It is intended for swimming pools
and other applications where there is a demand for high capacity together with a low-pressure drop.
All models can be installed together with boilers, heat pumps, solar panels or other heat sources.
These heat exchangers are light and compact. The material used is acid-proof stainless steel AISI 316. Stainless steel adjustable fixings are included.
Maximum pressure: Primary 10 bar %u2013 Secondary 10 bar.
|
|
|
Pahln Hi-Flow titanium is a heat exchanger with excellent heat transference capabilities. The unit is intended for swimming pools and other applications where there is a demand for high flow rates together with a low-pressure drop. Titanium is chosen for its high resistance to corrosion and is therefore suitable for pools and spas with aggressive water, salt water and where a salt chlorinator is used. The titanium heat exchanger is light and compact with welded jackets and pipe system for the transfer medium. Titanium heat exchangers can be installed together with boilers, heat pumps, solar panels or other heat sources.Maximum pressure: Primary 30 bar - Secondary 5 bar.
|
|
Pahln Maxi-Flo is a well-tried and tested heat exchanger with effective heat transference capabilities. It is intended for swimming pools
and other applications where there is a demand for high capacity together with a low-pressure drop.
All models can be installed together with boilers, heat pumps, solar panels or other heat sources.
These heat exchangers are light and compact. The material used is acid-proof stainless steel AISI 316. Stainless steel adjustable fixings are included.
Maximum pressure: Primary 10 bar %u2013 Secondary 10 bar.
|
|
Pahln Maxi-Flo is a well-tried and tested heat exchanger with effective heat transference capabilities. It is intended for swimming pools
and other applications where there is a demand for high capacity together with a low-pressure drop.
All models can be installed together with boilers, heat pumps, solar panels or other heat sources.
These heat exchangers are light and compact. The material used is acid-proof stainless steel AISI 316. Stainless steel adjustable fixings are included.
Maximum pressure: Primary 10 bar %u2013 Secondary 10 bar.
|
|
Heat exchanger for swimming pool water heating.
Heating tube array made from high-alloy stainless steel
With fitted thermal insulation
|
|
|
|
|
|
Swimming Pool heat Pump heater from China Palm Air Conditioning & Equipment 12KW and 18KW
The product can be installed in many environments, including a constant
temperature swimming pool, sauna constant hot water system, or to supply
hot water at home.
Striking characters distinguishing from other products.
1.Automatic operation mode
2.Auto-restart, Auto defrost.
3.LCD Control panel with luxury outlook.
4.Cooling&heating.
5.Wide ambient range : -10 centigrade to 43centigrade
6.Japanese brand compressor
Other main characters.
1) Long operating life: Using the advanced stainless steel/titanium
metal water heat exchanger, which resists the erosion from chlorine
in the water, creates a longer lifespan.
2) Economical and high-efficiency: Using heat pump technology, compared
with other ordinary hot water equipment ,it reduces operating costs
by 65-80%, In addition it creates no pollution.
3) Bright design, easy installation and replacement: Unit design
separately for main model and water unit model, with water unit
inside, avoiding freezing in the winter. The unit is remarkably
compact, with pump and flow switch inside.
4) Advanced controlling: It is extremely easy to control. The swimming
pool heat pump unit is in the room, because of the mini-computer
intelligent controlling .
5) Safety: Water and electricity are insulated, no open fire, no creepage.
6) Quiet: Using the high-efficiency, low sound rotary or scroll compressor,
low noise fan, high quality pump
7) High technology heat exchangers: Due to brand and heat exchanger, it
runs more efficiently with R410a gas.
|
|
Fiberpool.EU offers a high efficiency environment friendly heap pump E-THERM.
It works in severe Baltic and Scandinavian climate with no doubts even below ZERO temperatures!
E-THERM heat pump 6.50 kW(uses 1.2 kW)
E-THERM heat pump 8.80 kW(uses 1.7 kW)
E-THERM heat pump 13.2 kW(uses 2.6 kW)
E-THERM heat pump 17.5 kW(uses 3.5 kW)
E-THERM heat pump 21.0 kW(uses 4.3 kW)
E-THERM heat pump 25.0 kW(uses 5.0 kW)
|
|
The ambient air is bled, and the calories present are used to heat your water."
This exploitation economic of heat to l%u2019air and the sun makes you save up to 80% of energy! The heat pump for pool offers an output quite higher than the traditional solutions to heat l%u2019eau your pool.
Thus, for each consumed kw, your heat pump for pool restores
between 2 and 5 kw, are up to 80% of free energy. The calories to l%u2019air are %u201Ccaptes%u201D by your heat pump to heat your pool in a completely autonomous way.
|
|
Heat pump high output for basin up to 1000 m3 and +.
These heat pumps developed for the public installations allow the heating of basins in off season and can even cool the basins. The calories thus taken in the water of the pool are recovered for the heating of domestic hot water (ECS).
|
|
Function
Auto operation mode
Cooling&heating
Auto-restart, Auto defrost
LCD Control
Features
Wide range user: -10`43
Powerful heat transfer and low running cost
Titanium heat exchanger
Japanese brand compressor
Green refrigerant R410
|
|
|
The heat pump for Hkia pool offers an output quite higher than the traditional solutions to heat the water of your pool. Thus, for each consumed kw, your heat pump for Hkia pool restores between 2 and 5 kw, are up to 80% of free energy. The calories of the air "are collected" by your Hkia heat pump to heat your pool in a completely autonomous way.
|
|
|
|
Heating and filters for swimming pools
