|
|
|
|
|
|
The Certikin Genie range of condensing gas pool heaters is one of the worlds only condensing pool heaters. Following the unprecedented success of the initial launch of the Genie boiler and acting on constructive feedback from the trade, the Genie now features a water to water heat exchanger with cupro nickel tubes. This means that even if you are struggling to maintain perfect water balance, the Genie is robust enough to cope. Still using condensing technology, the Genie range delivers up to a fantastic 94% efficiency compared to standard direct fired pool heaters which typically operate at between 60 to 80% efficiency.
Features
Available in 36kW (123,000 btu) and 49kW (167,000 btu) outputs
Only one unit to stock for either natural or LPG - supplied natural gas with a conversion kit to LPG included
Tamper proof lockable pool temperature display in C or F
Up to 94% condensing efficiency - equivalent to Sedbuk A
Running cost reduced by up to 30%
Environmentally friendly
Modulating output for accurate temperature control and increased efficiency
IP44 for indoor or outdoor installations
Quiet running
Lightweight compact design
Pool connection left to right OR right to left
Simple condensate disposal connections left or right hand side
Pre-plumbed c/w a double non-return valve and filling loop
Plastic flue kits, push fit horizontal and/or vertical up to 20m
Honeywell CVI controls
Muliple heater kit options up to 400kW output (8 heaters)
CCP pool control panel compatible
Wall mounting kit available
Commissioning / diagnostic display with service indicator (2000 hrs run time)
Suitable for use with salt chlorinated pools
|
|
Available from 3kW - 72kW
The tank and elements are made from 316 grade S/S
All have a control thermostat for temperature settings and an overheat thermostat
Delivered in colour coded cartons for easy shipping
All models are fish safe
|
|
|
Electric heater 1,5-3,0 kWPahlén electric heater is designed for continuous flow with the lowest possible pressure drop. The compact dimensions make it suitable for spa pools, small swimming pools and installation in restricted spaces. The heater is manufactured from acid-proof stainless steel AISI 316. It is available in three sizes of 1,5 kW, 2,0 kW or 3,0 kW and is fitted with an adjustable thermostat 0-45°C together with automatic over heating protection.
|
|
¬ Swimming pool heating installation. It uses night rate electricity in hotel complexes, sports centres, clubs, private homes, buildings, and so on.
¬ This energy is the most economical, safer, reliable and the least polluting.
¬ Maximum heating time is 8 hours (23h-7h is the normal night rate tariff). If you heat up for 24 hours a day, you should divide by 3 the power shown on the table.
¬ This is the consumption during the coldest day. The rest of the time, the consumption will be lower than the one shown on one on the table.
¬ The information appearing in "Technical data" is only valid for outdoor swimming-pools when the outside temperature is not below 15ºC.
|
|
Ultra-high performance in a compact, quiet, and eco-friendly design
MasterTemp® Heaters offer all the efficiency, convenience, and reliability features you want in a pool heater, plus a lot more fast heat-up, compact design, super quiet operation, easy to use, and eco-friendly.
An Eco Select™ Choice: MasterTemp® Heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Heats up fast so no long waits before enjoying your pool or spa
Best-in-class energy efficiency
Manual gas shut-off when service is required
Eco-friendly MasterTemp® is certified for low NOx emission and outperforms industry standards
Rotating digital display allows for easy viewing
Tough, rustproof exterior handles the heat and weathers the elements
|
|
|
|
|
|
Get that warm-all-over feeling
For indoor or outdoor installations on pools and spas. Features include an LED temperature readout with dual thermostat controls, temperature safety lockout, and 6-position control panel. PMG burner technology requires no outdoor draft hood. Proven Dura-Glas® rust-proof construction with plastic manifold and PVC union connections. Heavy-duty unit with cupro-nickel exchanger stands up to the harshest of applications, like low pH, high flow or heavy use.
An Eco Select™ Choice: Max-E-Therm® high performance heaters offer best-in-class energy efficiency. Plus, they are certified for low NOx emissions, making them eco-friendly favorites.
Features
Lightweight - Lightest heater in its class
Compact Design - Ideal for retro-fit installation
Easy to Switch - Change gas sources with installation of separate orifice
Environmentally Friendly - All units are low NOx
Rustproof Housing Sleek, matte black enclosure is made of{PROD:Dura-Glass - an exclusive Sta-Rite material that handles the heat and weathers the elements
Lower Operating Costs - 84% efficiency rating - rated 1st in its class for highest energy efficiency
Custom or Retrofit - Direct-connects to Sta-Rite System:3® Mod Media filter or easily fits other systems
|
|
Sofath pool heating: Increase the pleasure decrease the costs. Sofath geothermal heating is also available in an integrated package to heat your swimming pool.
The thermal heat exchanger uses your geothermal heating to provide an agreeable water temperature and a longer bathing season with all the cost advantages of geothermal.
|
|
Specially designed for pool water heating, available both in AISI 316
stainless steel with mirror finishing and - for some sizes - in silver coloured
lacquered titanium.
Electro-welded outer body with water flow coil and control drain for
temperature measuring
Max operating pressure:
- Heating circuit 10 bars
- Pool circuit 3 bars
|
|
|
Pahlén Hi-Flow titanium is a heat exchanger with excellent heat transference capabilities. The unit is intended for swimming pools and other applications where there is a demand for high flow rates together with a low-pressure drop. Titanium is chosen for its high resistance to corrosion and is therefore suitable for pools and spas with aggressive water, salt water and where a salt chlorinator is used. The titanium heat exchanger is light and compact with welded jackets and pipe system for the transfer medium. Titanium heat exchangers can be installed together with boilers, heat pumps, solar panels or other heat sources.Maximum pressure: Primary 30 bar - Secondary 5 bar.
|
|
Heat exchanger for swimming pool water heating.
Heating tube array made from high-alloy stainless steel
With fitted thermal insulation
|
|
|
|
|
|
Swimming Pool heat Pump heater from China Palm Air Conditioning & Equipment 12KW and 18KW
The product can be installed in many environments, including a constant
temperature swimming pool, sauna constant hot water system, or to supply
hot water at home.
Striking characters distinguishing from other products.
1.Automatic operation mode
2.Auto-restart, Auto defrost.
3.LCD Control panel with luxury outlook.
4.Cooling&heating.
5.Wide ambient range : -10 centigrade to 43centigrade
6.Japanese brand compressor
Other main characters.
1) Long operating life: Using the advanced stainless steel/titanium
metal water heat exchanger, which resists the erosion from chlorine
in the water, creates a longer lifespan.
2) Economical and high-efficiency: Using heat pump technology, compared
with other ordinary hot water equipment ,it reduces operating costs
by 65-80%, In addition it creates no pollution.
3) Bright design, easy installation and replacement: Unit design
separately for main model and water unit model, with water unit
inside, avoiding freezing in the winter. The unit is remarkably
compact, with pump and flow switch inside.
4) Advanced controlling: It is extremely easy to control. The swimming
pool heat pump unit is in the room, because of the mini-computer
intelligent controlling .
5) Safety: Water and electricity are insulated, no open fire, no creepage.
6) Quiet: Using the high-efficiency, low sound rotary or scroll compressor,
low noise fan, high quality pump
7) High technology heat exchangers: Due to brand and heat exchanger, it
runs more efficiently with R410a gas.
|
|
Poolex heat pump
Ecological
Powerful, ecological and easy to install, the heat pump takes in l%u2019air external of energies (free) qu%u2019elle restores with l%u2019eau basin. This system is not only respectful of l%u2019environnement, but in more it thus makes it possible to realize savings on the operating costs.
Economic
To heat its pool was regarded a long time as a luxury, very expensive and constraining. Today, thanks to the clever system of the heat pumps, to heat its pool is an accessible pleasure.
Powerful
Which pleasure of benefitting from the first rays of the sun, in the month d%u2019avril, in your pool with 28 °C%u2026 But also of prolonging your season of bathe at the end of October, even in November for the lucky ones, as if one were still in the month d%u2019août%u2026
|
|
The all new Pro-Pac range of swimming pool heat pumps are designed for larger pools. Like all Calorex swimming pool heat pumps, the Pro-Pac range is designed with components that will give durability and efficiency in typical swimming pool conditions.
Key features include:
Capacities from 43kW to 140kW
Fully automatic operation
Zero ozone depleting R407C refrigerant – ensures reliable, efficient operation regardless of air temperature
Reverse cycle defrost option available
Soft start option available
Scroll compressors
Titaniumm condenser *
Water flow switch
Comprehensive circuit protection
Designed and manufactured in the EU to CE & ISO 9001 standards
|
|
The ambient air is bled, and the calories present are used to heat your water."
This exploitation economic of heat to l%u2019air and the sun makes you save up to 80% of energy! The heat pump for pool offers an output quite higher than the traditional solutions to heat l%u2019eau your pool.
Thus, for each consumed kw, your heat pump for pool restores
between 2 and 5 kw, are up to 80% of free energy. The calories to l%u2019air are %u201Ccaptées%u201D by your heat pump to heat your pool in a completely autonomous way.
|
|
Slash pool heating costs to pennies per day
With ThermalFloTM Heat Pumps, heat from the atmosphere is transferred to your pool or spa, providing the most energy efficient heating available. ThermalFloTM Heat Pumps are our latest and most technologically advanced heat pumps, offering more standard features than any other.
An Eco SelectTM Choice: ThermalFloTM Heat Pumps heat pumps transfer heat from the atmosphere to the pool or spa, saving up to 80% in energy costs compared to gas-fired heaters. Plus, they are the only heat pumps available that use R-410A refrigerant-EPA-recognized as environmentally safe and clean.
|
|
A starting investment quickly compensated by a tiny cost of exploitation.
The installation of an heat pump JD CAP guarantees comfort and wellbeing to you while being based on a reliable, economic and respectful technology of the environment: 80% of the energy transferred to the pool come from the calorific energy contained in the air. Associated with a thermal cover (covers with bubbles), the installation of an heat pump can double your season bathe.
And that in all simplicity: only handling consists in programming your pump on 28°C!
It adapts on the pools in construction as on those existing.
|
|
Solar heating is an economic and ecological solution to double the season of bathe.
Jacques GIORDANO Industries developed, a kit complete of solar heating, ready to even assemble oneself, which is connected directly on filtration external of the pools Except Sol.
|
|
Modular solar collector POLYTUB "M" is especially designed for installations on roofing.
The matter used (Polypropylene) in its manufacture, confers rigidity to him allowing a good behavior and an excellent esthetic aspect.
The originality and the quality of its design allow a fast and simplified installation.
|
|
|
|
|
|
Solar Power
The sun is the ideal source of energy to heat water in swimming pools: comfortable, reliable and perpetual. At the same time, the sun also contributes substantially to the reduction in the costs of energy, because less gas is required to heat the water.
Various swimming pool owners have already discovered that the use of solar power gives benefits:
- Lower energy costs because the heating boiler provides no or little additional heating.
- The use of solar power is an environmentally-friendly way of heating the water in swimming pools.
- Extension of the swimming season by two months (in comparison to an unheated open-air pool).
In addition, solar-power systems require little or no maintenance. Opting for a solar-power system therefore means opting for future-orientated and cost-effective technology, without making concessions in terms of comfort.
Solar Collector: heat all of the time!
The most important part of a solar-power system is the collector, which converts sunlight into heat. Collectors can be placed either on the roof or on the ground. Even when the sky is cloudy, the collectors are still able to supply heat. They have, in fact, been built in such a way that they convert light into heat. If the sun shines in abundance, the water will heat up quickly. If it is cloudy, it will take a little longer for the water to reach the required temperature. Collectors supply sufficient heat to, for example, keep an outside pool at a pleasant temperature for almost the whole swimming season, or to contribute to heating the water in an indoor swimming pool throughout the year.
|
|
|
|
|
|
In covered swimming pools, large quantities of water evaporate into the air and if the relative humidity is not maintain artificially in certain levels, this will lead to reducing the comfort in the swimming pool and damaging of the building structure and equipment within it.
For minimizing of this negative influence a need of equipment, creating maximum comfort and related to the latest requirements for high energy efficiency is faced. These are the logical preconditions for developing the swimming pool dehumidification air-handling units type Max. E %u2013 Pool.
Produced in 5 sites:
- Airflow %u2013 3000 %u2013 15000 m3/h
- Dehumidification capacity (VDI 2089) %u2013 19-99 kg/h
- Designed to dehumidify %u2013 the air in covered swimming pools with pool areas follows:
- Private pools %u2013 90-455 m2
- Public pools - 68 %u2013 343 m2
- Additional heating working with: hot water (standart execution) or electric (optional)
- Possibility for mounting on the outside, as well as in a machinery room
- Possibility for remote control (with additional LCD display)
- Refrigerant R 407 C
|
|
|
|
|
|
Starline vinylester filters are available in a number of types: deep bed, side mount, with or without bottom nozzles, depending on legal requirements.
Starline Filters meet European standards and legislative requirements. The filters meet all applicable standards and statutory regulations including the WHVBZ, VLAREM, DIN 19643 and KOK.
The Starline filters are suitable for private use and commercial applications and available in sizes from 400mm width up to 2500mm.
Starline also offers complete filter units with a newly designed silent Starline pump. These filter units can be fitted with a Starline Poolcontrol (230Volt or 400Volt), the complete swimming pool control system. To guarantee crystal-clear water, the filter unit can be expanded with the Starline Ozonator and Ionisator, next to the (optional automatic) multiport 6-way valves.
The complete Starline filter units are available in deep bed and side mount. Their diameters range from 400 mm up to 800 mm. The filter units are supplied ready to use and are pre-plumbed on to an attractively finished stainless steel base. The complete installation is of course pressure- and water tested before leaving the factory.
|
|
Clean & Clear® Plus Filters have a corrosion resistant injection molded filter tank featuring superior strength and reliability. The cartridge assembly uses four easy to clean, non-woven, polyester cartridges. Each filter is supplied with a bulkhead union set for easy installation.
An Eco Select™ Choice: Water flows very efficiently through Clean & Clear® Plus Filters filters allowing the use of smaller pumps or lower pump speeds to minimize energy use. And when consumers rinse cartridges rather than backwash, they can significantly reduce water use, too.
|
|
| ... products without information |
| |
|
|
Heating for swimming pools
