|
|
Draw attention to your company, product or event. Custom flags are one of the most visible and effective ways to promote your company or organization. Made of nylon or polyester, custom flags offer the beauty of color and motion. Flags can be produced using the following print processes: acid dye, screenprinted and dye sublimation.
|
|
POSTING - BUS SHELTER
Double-side totem ICARO is carried out entirely out of sheet steel corten ép.25/10 mm, sanded and treated by a specific cycle of accelerated oxidation and passivation developped at the point by Metal-Co.
Fixing on the ground is done by a base adapted carried out out of stainless steel glossed ép.6 mm with platinum allowing fixing the support by ankles with expansion.
The useful surface area of posting is of 700x1000 mm, it will be used by screen printing the compact polycarbonate panel directly ép.7 mm delivered in series, or applying a screen printed adhesive film resistant to UV, on its internal face.
The totem is equipped with a frontal bar gutter out of square glossed stainless tube. Stainless screws and bolts. Dimensions 800x100 mm, Ht=2050 Misters.
design: sjit |
|
|
Put a spotlight on your sponsors as the competition heats up. Our custom graphic structures enhance your event and can be designed to your specifications. Structures are made from a variety of substrates and materials including coroplast, vinyl covers, and fabric wraps.
|
|
Building banners are fabricated to withstand the elements, maintain visibility from within and ensure your message does not go unnoticed. Maximize your message with our larger than life building banners or wraps and prepare to see the results of high impact graphics.
|
|
Waterproof display cabinet
indoor/outdoor
Usable display dimensions
420 x 594 mm (A2)
|
|
Indoor or outdoor cabinet
- wall-mounted or free-standing.
- Made of aluminium, the door is
mounted on two pneumatic hinges that
allow it to be held open easily.
The cabinet has a waterproof joint round
the opening and perforations to prevent
condensation forming.
- dark green magnetic base + magnets
- the glass is « Securit » toughened glass
- safety locks
- delivered in anti-breakage recyclable
packaging
|
|
The Net12
©2004 Richard Shed
Powder coated steel with silicone rubber cord.
940(w)x1470(w)x420(d)mm
Available in a range of finishes and sizes.
Exhibited at the 5F69 show, September 2004
The Net is intended to encourage creativity and interaction. It functions as both a space divider and display panel
Users are encouraged to store and display images, flyers, postcards, magazines between the rubber cords allowing the surface to evolve and adapt depending on the users requirements.
|
|
Indoor showcase SHOW
Showcases
Folding opening and cork background to display notices by using pins.
Design: flat showcases
Dimensions: medium-big size
Uses: indoor and outdoor
Lighting system: with neon lamps incorporated into the showcase (only for outdoor showcases)
Applications:outdoor (with protection), indoor (with or without protection), click system; wall system or on ground support
Materials: powder coated structure with protection made of different materials and background made of powder coated or black anodized ribbed aluminium (for Clip moduli), plasicized steel, cork. Anodized or powder coated aluminium supports complete with zinced or powder coated bases
Graphics: interchangeable. Papers or cards can be displayed by using pins or mangets; also suitablefor Clip system; sometimes graphics can be permanent with a pre-spaced adhesive vinyl or adhesive digital print on background or on the crossbar.
|
|
Vertical TOTEM type A
Area identification signs
Two uprights system with convex panels and raised base.
Design: Monolithic structure with flat or convex panels
Dimensions: big size
Uses: indoor and outdoor
Lighting system: available
Applications: horizontal, vertical and flag system Totem
Materials: uprights and structure made of powder coated aluminium with panels made of aluminium, steel or polycarbonate; bases made of zinced or powder coated steel, or aluminium covering
Graphics: permanent pre-spaced vinyl or adhesive digital print
|
|
Dimensions:
posting part: H X L: 253 X 145 cm. In high part: graphic bill-poster with possibility of edition of all the control panels road and
possibility of composing yourself of the images or pictograms.
Very easy handling thanks to the hydraulic actuating cylinders with electric drive.
Piloting and recovery of the remote data thanks to provided modem GSM of series.
Possibility of publishing on site, in the event of unforeseen situation, of the messages using the remote control with will infra red.
|
|
Aluminum gantry shaped diameter 60 or 90 Misters Surface impression in forex 8 mm anti-graffiti. Visible surface: idem elliptic gantry. Fixing on platinum or by direct sealing in the ground (to be specified with the order). For an impression recto back: us to consult.
|
|
Perfect for indoor display. Frames are lightweight and extremely versatile, providing the ability to be linked together to produce backdrops, kiosks, towers and other structures. Carry bag included. Additional sizes available, please call for more information.
Height: 40" - 94"
Width: 36"; 60"; 120"
|
|
Satin-finish
presentation unit - VELA
|
|
Crystal clear acrylic presentation unit -
VELA
|
|
Presentation units + 2 kakemonos
Makina
Steel base and aluminium plate to which can be attached, on one or both sides and at the height required, poster holders and wire trays.
|
|
Poster frame on feet -
ADA1 & 2
A-Display
Double sided display, Prestalu system anodised aluminium.
Water resistant and have integrated water outflow holes in the bottom profiles.
|
|
Presentation units + 1 kakemono - Makina®
Steel base and aluminium plate to which can be attached, on one or both sides and at the height required, poster holders and wire trays.
|
|
Modular presentatrion units - PRESTALU on Makina
Double sided display
3 sizes of trays :
A4 A5 or double 1/3.
|
|
Range of descriptive totemic for the interior and outside. The volume of Triplex glass takes seat in an aluminum support. Marking by sanding, serigraphy and cut out semi adhesive. In conformity with the principle of accessibility generalized for the built framework: the chain of displacement must be continuous and the identical access terms for all. Specific equipment handicapped for an accessible advance: location of the elements structuring by the partially-sighted persons, contrasts tactile and visual, adapted reading any public.
These totems are elements of beaconing of the podo-tactile advance, this range can disseminate information in relief: diagrammatic plans of the access of the frame, characters Braille, big letterss and universally comprehensible pictograms.
The option "full access" is the answer marcal to the problems as regards accessibility (ERP...) following the law of February 11th, 2005 for the chance and equal rights, the participation and citizenship of the handicapped people. It is the guarantee of a descriptive system in conformity with the law "handicap": rules of accessibility, information and indication. A study of establishment according to two axes of major reflection is necessary: the continuous chain of displacement and the logic of addressing of spaces of destination. The principal techniques implemented are the transcription in Braille, the writing in relief and wholesale characters, the recourse to the standardized pictograms and the marked out podo-tactile advance of totem. The full access makes it possible to integrate the handicapped people and to improve quality of life on the long run thanks to an environment accessible to all.
|
|
Type: QLMI 25.40.05
Height of characters: 5cm
Many lines: 25
Many characters: 40
Color of characters: Normal Red Bright
|
|
nteractive furniture - KAORI®
Futuristic design for a very functional terminal displayed on a stand or fixed to the wall. It can house a flat 17 " screen, and a desktop-type CPU can slotted into the base of the terminal.
|
|
Foldaway terminal - PRESTO i
Interactive Presto, Foldaway aluminium terminal. A laptop computer can be placed in the 180° opening.
Keyboard with a removable trackball.
|
|
Bevelled lettering borders
Add even more elegance to your lettering or a more harmonic fit with bevelled borders. A style which also increases the LED light emission. |
|
Surface: Stainless steel
Light Color: Red
Typeface: Brush Script which also increases the LED light emission. |
|
|
|
Reception furniture : signs, totems, display panels
