|
|
Aluflam fire resistant glass roof is made in a patented aluminium profile system with narrow frames that gives full light effect in the building.
Our glass roof have the following features:
Narrow lines
Different surfaces
Aluminium - non corrosion
Different glass thickness
It can be powder coated in any RAL, NCS, or anodized in standard colours or the Aluflam AZ Silver surface.
Aluflam glass roof and skylights are uniquely designed for their high durability and are made to meet the fine testing class.
|
|
|
The Flushglaze fixed flat glass skylight can be tailored to meet many shapes and sizes from square, rectangular, triangular and a recently completed tear drop shaped. Glazing Vision will identify and design the rooflight to meet your needs. The Flushglaze is a very low profile system based on car windscreen technology, the glass being structurally bonded and triple sealed making it ideal for flat roof applications on a pitch of only 3-5 degrees. This reduces water ponding and condensation risks to a minimum by the elimination of internal flashings and metal framework and can be installed on flat or sloped roof applications. The rooflight can be extended to any length like ribbon glazing by linking sections either with glass to glass silicone seals, back to back angles or glass fins.
|
|
|
|
|
|
Due to the popularity of our roof terrace access rooflights, the designers at Glazing Vision have developed a design principle which can be used to offer a standard solution in both a free standing box rooflight or a 3 wall mounted version. Using these design principles cost and lead time reductions can be passed onto the customer.
The Sliding box rooflights are a great option for terraced access as it offers a physical structure and the fixed walls of glass provide a balustrade around the opening. It also allows you to continue your handrail right up to the point of leaving the box and stepping onto the roof terrace. The box rooflight consists of two sections, one fixed section and one sliding section. The sliding section slides over the fixed section to create 50% clear opening thus allowing the user to walk through and out of the rooflight. All the glass used is flush to allow water run off and easy cleaning, whilst maintaining maximum security.
All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within a day.
|
|
The Cosmos, sliding over roof rooflight, retracts in one-panel onto the roof creating a 100% clear opening. All the glass used is flush to allow water run off and easy cleaning.
All Glazing Vision sliding rooflights are low-noise in operation and have built in electronic solid-state controls with battery back-up, manual override, speed control and creep-speed sealing at end of travel as standard. Units are factory pre-assembled and tested, usually craned into position, fitted and commissioned within day.
|
|
|
|
|
|
SatenLux®
Acid-etched glass. Quality opacity.
SatenLux® - SatenGlas® - LuxMat®
3 types of opacity and finish that allow you to choose its level of luminosity and light diffusion, smooth to the touch, brilliance, stain-resistant and an antireflection effect for the most versatile applications.
SatenLux®: Refined translucency with a brilliant appearance, while still maintaining its opacity. This model is the most versatile and resistant to stains. Highly appreciated for its ease of handling in bevelling, corner-shaping and striating machines, thanks to the fact that it is easy to clean.
Ideal for
- Creating atmospheres in decoration and interior architecture,
- Building construction and exterior architecture, facades.
- Designing furniture, doors, kitchens, baths, stairs, windows...
Guaranteed homogenous quality and ISO 9001 (quality control) and ISO 14001 (Environmental safety) Standard Certifications.
CHARACTERISTICS - SatenLux®
Colours: extrawhite, white, bronze, grey, green and blue.
Thickness: 3, 4, 5, 6, 8 and 10 mm.
Size: Standard 225 x 321 cm
(Also available: laminated and mirror).
ATTRIBUTES AND QUALITY
> Base: float glass norm UNE-EN 572-2
> Highly resistant to stains and fingerprints.
> Easy to clean
- Can be cut, bevelled, curved, drilled, tempered and laminated.
- Awarded the ISO 9001 (Quality control) and ISO 14001 (Environmental safety) Standard Certificates.
|
|
|
|
|
|
The MX system allows sloped glazing to be created in Visible Grid or TrameVerticale.
These option gives specifiers the flexibility to construct sloped roofs, atria, canopies, valleys and pyramids, which are fully compatibles and visually consistent with the vertical façade.
MX Visible Grid
A special transom cap for the horizontal and vertical profiles reduce the collection of water on the slope.
The rafters and transoms are square cur and assembled using a penetrating transom principle.
MX Trame Verticale
There are vertical caps and silicone sealant on the transom with pressure blocks to prevent deflection under negative wind load pressure.
A minimum slope is available of 10° for single glazed units and 15° for double galzing.
Construction
The 8mm to 32mm infill is held by horizontal and vertical pressure plates for the visible grid system and by vertical pressure plates and horizontal pressure blocks for MX Trame Verticale.
Weather performance
Drainage is achieved from the transom ends through the rafters.
The grid system is glazed with an EPDM gasket to the inside and butyl tape to the outside. MX Trame Verticale has an infill gasket and silicone on the transoms.
|
|
Sky Factory SkyV%u2122
SkyV digital cinema virtual skylights display the essence of nature%u2019s sky-events in vivid high-definition (HD) sequences. Captured with an artist%u2019s eye and using cutting-edge RED Digital Cinema technology, SkyV brings the wonder, beauty, and deep physiological relaxation of nature%u2019s events to high-end interiors.
SkyV sequences are long, fixed compositions, generally one to one-and-a-half hours each, which allow viewers to fully immerse themselves in the play and display of the sky%u2019s changes over time.
SkyV is a ceiling-mounted system of commercial-grade HD LCD screens integrated into a patent-pending, faux skylight framework. The system includes multi-channel graphics processors and specialized synchronization software to display terabytes of proprietary HD content. SkyV simulates a real skylight, presenting hours of visual content captured worldwide from beneath beautiful skies, clouds and flora.
|
|
Roof dome-shape is the best solution to settle a question about natural lighting.
Each intermediate element has 7 moulded stiffening ribs placed at a distance of 30 cm each other. It is 180 cm long.
By cutting can be obtained sub-multiples 60-90 cm long.
Thermoformed skylights are planned with raw plastic materials:
Acrylic PMMA, that has a warranteed behaviour (class 5) in case of fire. It has been UV stabilized for good weatherability and resistance prolonged sunlight exposure.
Policarbonate that gives brightness, gives a bigger endurance against fires and vandalic actions.
Domes can be planned in the following shapes:
- Vela: single wall, double wall
- Diamond: single wall, double wall
|
|
The system is composed of a modular structure in aluminium profiles with large cross-section, including beams, wall fixing sections, gutters and support columns.
All components are produced to exclusive TENDER designs with accurately selected materials that are fully tested to ensure only the best functionality, reliability and duration.
|
|
The Centered Skylights are made up of a system of centers in special extruded aluminium and covers made of compact polycarbonate, alveolar polycarbonate, polymethylmethacrylate or from the same combination.
These structures can be determined as to whether they are determined by different types of arched formations, and the skylights can be fixed or installed in opening dvices with manual or motorized movement, and the technical solutions depends on the dimensions and requirements of the Client.
|
|
VITRUM MIONI s.r.l. has devised and patented Calor-Lux an endowed skylight of a particular system of vertical opening that concurs the industrial buildings also with unfavourable weather conditions, assuring at the same time an optimal lighting system.
Moreover, the opportunity to use covers of various thickness and materials, on single or double wall, ensures the utmost quality and excellent results being durability and architecturally well thought out.
|
|
Sunglass is specialised in the production of curved glass for the sector of building and architecture, industry and decoration
Research, experimentation and high level technologies have enabled the company to achieve ambitious goals that demonstrate and highlight its great technical and productive capacity as well as the high quality and reliability of its products.
|
|
Roof Lights - Structurally Silicone Bonded
Rather than relying on a traditional aluminium framework such as 'patent glazing' to support the double-glazed panels, why not have the glass do all the work?
Glass is a very strong material and can support great loads (see 'glass flooring' for more information). Also, the air within the double glazed units is a good insulator - hence the reason why it is hermetically sealed, to stop heat/cold transference.
Designing the glass roof light to be self-supporting, with no aluminium supports, results in a much lighter appearance, giving designers and their clients a bigger 'wow factor', and at the same time being more effective and efficient in insulating the property into which it is installed.
Glass is strong enough to cope with some significant loads, and is able to span up to 1700mm without deflecting (based on a 10mm toughened outer sheet, 16mm spacer and a 6mm toughened inner sheet).
|
|
Often viewed as being out of date, there are still good reasons to specify the use of patent glazing. Where there is a need to match the style of the building, patent glazing will complement the design.
Where minimal intrusions are required, the use of the inverted 'T' sections allows head heights to be maximized. Roof vents will need to be framed, rebated and gasketed - needing a patent glazing bar.
With a variety of thermally broken patent glazing bars available we are able to accommodate different loadings, subject to calculating the pitch of the roof, glass weights, etc.
|
|
Oldcastle Glass® Naturalite provides unsurpassed quality control. That’s because we do it all in-house. We’re the only skylight company capable of offering the following services in-house:
- Design and engineering with state-of-the-art CAD equipment and registered engineers
- Extruding of material
- Finishing of material, both anodized and Kynar® painted
- Fabrication of material
|
|
Oldcastle Glass® Naturalite provides unsurpassed quality control. That’s because we do it all in-house. We’re the only skylight company capable of offering the following services in-house:
- Design and engineering with state-of-the-art CAD equipment and registered engineers
- Extruding of material
- Finishing of material, both anodized and Kynar® painted
- Fabrication of material
|
|
Oldcastle Glass® Naturalite provides unsurpassed quality control. That’s because we do it all in-house. We’re the only skylight company capable of offering the following services in-house:
- Design and engineering with state-of-the-art CAD equipment and registered engineers
- Extruding of material
- Finishing of material, both anodized and Kynar® painted
- Fabrication of material
|
|
SEVM EC - SEVM P EC (discharge system of smoke clearing)
Devices of natural drainage of certified smoke and heat THIS allowing the automatic opening of a window GGL version great comfort in the event of fire. 3 versions: mechanics, tire with thermodeclenchor or without thermodeclenchor. Version Comfort. Completion wood TOPfinish varnish.
|
|
Smoke and heat exhausts
Heat and Smoke exhaust, constructed in accordance with standards UNI 9494 - EN 12101.2, can open under any given meteorological condition and guarantees maximum safety with minimum risks.
The "ZENITALE TVVE", guaranteed for only automatic and self-sustained opening above the exhaust, is equipped with an external device that allows it to be opened to comfortably to carry out maintenance.
The "ZENITALE TVVE" device, built in elettroliticaly galvanized steel, can ensure mechanical opening at 165° with only one pneumatic cylinder that is self-powered with each supplied CO2 tank, triggered by the heat-sensitive tube set at 68°C.
The mechanical closing device and the pneumatic cylinder that generates movement, specially sized for use, guarantee proper exhaust running.
The "ZENITALE TVVE" is in accordance with the standard UNI 9494 with special reference to the following points:
|
|
E.F.C.SICUR SMOKE
SMOKE AND HEAT EXTRACTION SYSTEM
Planned with bent aluminium profiles 6060
In its angles assembled by brakets
Appropriate space for gasket seat
Fixed loom with additional edge allowing water drip
Fixed loom and movable shutters
Aluminum pneumatic telescopic roll
Shock absorber built in
Individual opening and thermic device through thermofusible ampoule rated to 68°/93°/141°C
Individual opening and thermic device, cylinder CO2 that has a heat
resistance 100°/140°C
Pneumatic and micro-roll lock with pole for the external maintenance
Antilocking system for movable shutters by steel arm
|
|
The system for l%u2019evacuazione of the smoke and heat VELUX, allows a natural vent towards l%u2019esterno to the smoke d%u2019incendio and to the heat.
It facilitates the sfollamento of the present persons nell%u2019edificio, l%u2019intervento of the National Fire Departments and reduces the risk of collapse of the carrying structures, had all%u2019azione of the gas warm.
The evacuation system smoke and heat VELUX is a complete system and certificate in compliance with the existing norms.
The presence of a baffle plate of the wind, to place around the external perimeter of window VELUX, guarantees the certifyd effective area of evacuation of the smoke.
|
|
In addition to fixed glazing and doors, fire protection for windows is also an increasingly common requirement. Special fire-resistant windows are necessary on corners, in built-up areas, but also leading into an atrium. For this, Schüco has developed a special construction based on Schüco AWS windows.
Both fire and smoke pose an enormous risk of death or injury. Consequently, the use of natural smoke and heat exhaust ventilation systems (SHEVS) is required in accordance with DIN EN 12101-2; this can be achieved with Schüco AWS in a wide range of designs.
|
|
|
|
|
|
Window with Anti-noise system of Rain (ABP) Any Comfort
Equipped with the new exclusive technology ABP (Anti-noise of Rain) on the whole of the components of the window, the new window any comfort lies within the scope of a reinvented design making it possible to divide by 2 the noise of impact of the rain compared to a traditional roof window.
The window any comfort profits from an exceptional dynamics of performances, to anticipate the risks of our external environment in a durable spirit of comfort.
Anti-noise system of Rain:
- Noise of the rain divided by 2*
- Sound Level: 48 dB (standard NF IN ISO 140-18), below the threshold of alarm clock of 50 dB
Insulation reinforced in winter:
- 35% of energy saving **
- Uw =1,6 W (m ². K) according to standard IN ISO 12567-2
Insulation reinforced in summer:
- 77% of the heat stopped in summer
- Solar Factor Sw = 0,23
Security of the people: laminated glazing of security (standard IN 12600)
Reinforced soundproofing (air noises road/):
- Classification of frontage 35 dB (A)
- Classification ACOTHERM AC2 Th9
Facilitated maintenance: Clear system & Net
- Clearly: in rainy weather
- Net: clean longer
* compared to the window comfort
** compared to a nonthermal double glazing
|
|
|
|
|
|
The FW thermally insulated escape window is side-hung and therefore side-opening. Once unlocked, the sash can be opened to 90°. A gas piston, fitted in the top part of the window makes opening easier, holds the sash stable when opened and prevents it slamming shut accidentally. The escape window is available in two versions, right opening FWP-R or left opening FWP-L
Note: View from the outside to determine whether a right or left opening window is required.
The large size of the escape window enables safe and easy access to the roof. These windows are recommended for all heated rooms.
Also available in conservation style.
- Manufactured from pine wood, vacuum impregnated, with two coats of clear acrylic lacquer.
- Handle positioned halfway up the sash for ease of opening.
- Suitable for roofs with pitches between 15° and 55°.
- Requires special flashings ESW, EZW, EH W and ELW(Note: flashings for pivoting windows are not suitable for escape windows).
- Comes with templates to facilitate installation.
- Wide range of accessories available, similar to that available for roof windows.
|
|
|
|
|
|
Features
The BDL L-shaped combination window can be opened in two distinct ways: tilting or turning. Tilting of the sash - max. 11cm turning - up to 90 degrees.
Both opening methods are performed with the use of one handle positioned on the side of the sash. This window type comes with a lock as a standard. It can be opened to the right - BDL-R or to the left - BDL-L.
4H-14-33.IT one-chamber glazing unit with the external pane toughened and the internal pane made of laminated glass, which increases the windows' safety, U-pane = 1.0[W/m2K];
new frame and sash structure;
innovative hardware;
new, double window sealing system;
operated by new handle;
wide range of accessories;
suitable for roofs with pitches between 15 and 55 degrees, installed with EU flashing.
Description:
The L-shaped combination windows are installed where the roof meets a vertical wall. These windows serve to extend the roof win- dow into the wall. This results in the amount of light entering the room and the field of view being greatly increased. The L-shaped combination windows can be combined with roof windows of any type.
The new line of L-shaped combination windows is characterised by a new frame and sash structure, innovative hardware and newly de- signed handle. The applied hardware enables a tilt and turn opening system - identical to the one used in vertical windows.
In this new range of L-shaped combination windows there is a dou- ble sealing system; peripheral seal and adhering seal.
|
|
|
A skylight window is a part of the MB-SR50 system, and is intended for roof mounting at the inclination angle from 10° to 70° in relation to the horizon, and may be used for making the ventilation hatches. The supporting aluminium profiles applied in the skylight windows are composed of the three-chamber sections, insulated with polyamide strips, which ensure proper strength, thermal insulation and rigidity. The windows fulfil the technical requirements for 2.1 technical group according to DIN 4108. The aluminium profiles are shaped in such a way as to ensure the window cross-section as compact as possible, so that the window does not protrude significantly beyond the roof surface.
|
|
|
Escape opening roof windows are available with right or left side opening and allow easy access to the roof.
|
|
Roof window structure wood with polyurethane hull moulded, white completion. Double system of opening: projection and rotation. Opening by projection towards outside, until 30°. Proposed in version Comfort.
Specifically for wet parts, this window is without maintenance. Slopes of 15 with 55°.
|
|
Top hung and pivot windows FPP can be opened in two distinct ways: outwards from the top, and via a centre pivot. The outward opening function enables the sash to be opened in any position from 0° to 35°, whilst the pivot function allows the sash to be rotated through 180°. The newly patented fitting system guarantees complete sash stability, both in top hung and pivot positions. To add to the window’s visual appearance, the external profile covering the window is pressed which improves the attractiveness of the window.
- Manufactured with pinewood, vacuum impregnated and finished with three coats of acrylic lacquer.
- Operated by handle positioned on the lower part of the sash. Opening method can be switched using the preSelect switch on the frame, accessible when the window is open.
- Suitable for roofs with pitches between 15° and 55° (complete with flashing).
- Wide selection of accessories (identical to those for pivot windows, excluding external roller shutters ARZ).
|
|
|
Comfort and design for the attic living space, where light and air are under controll. Flashing and seals make the window waterproof, airtight and thermal insulated.
|
|
|
|
Roof windows, Skylights
