|
|
Tamper resistant cable for public spaces
Lengths/Span:
Typically suits straight runs up to 20m (65’).
Cable Diameters:
3mm
4mm
5mm
Specific Features:
- Incorporates the World’s only true theft resistant turnbuckle.
- Unique tamper resistant “press” pins with minimalist architectural heads lock together to permanently secure the cable to the end connection.
- Fittings and lock nuts devoid of spanner flats cannot be undone with standard tools.
- Easily tensioned with unique “C” spanners - the average vandal doesn’t carry these in his back pocket!
- Sleek styling with aesthetics uncompromised by the security features and mechanical robustness.
- Quality Grade 316 stainless steel construction for harsh environments and long service life.
- Greater adjustment for longer runs and economy.
- Versatile connection options to suit timber or metal posts.
|
|
TECHNICAL DESCRIPTION :
Industrial handrails made of seamless tubes, ASCO type, acc. to DIN 24533, consisting of :
Columns made of tube Φ48,3x3,6 mm in maximum distances 1300mm
Interspace bar made of Φ26,9x2,6 mm
Hand rail made of tube Φ48,3x3,6mm
Protective bar 100/5 mm
TECHNICAL SPECIFICATION :
Steel S235JR according to ΕΝ 10025
Hot-dip galvanized acc. to ISO 1461 for protection against corrosion
APPLICATIONS :
industrial buildings, factories, airports, hospitals, etc.
|
|
In the Wind. Practical. Original.
These clean lined balustrades are mechanically assembled and fully adaptable. The system gets its character from its method of jointing in the channel form and its total flexibility. In addition the modular assemble allows for all rake angles to be site adjusted.
|
|
Perfect design allied to safety
A simple straight balustrade with perfect lines. The refinement of the line is achieved by eliminating welding and fixing bars mechanically. Conforming, as always to British Standards.
|
|
We can produce drawings within the following areas.
- Staircases - Industrial, Helical, Spiral, Stainless, Architectural, Concrete
- Handrailing/Balustrades - Industrial, Glazed, Architectural, Stainless
- Structural Steelwork – Portal Framed buildings
- Platforms & Walkways
- Cat Ladder & "Up & Over" Stairs
- Small Building Structures
- Refurbishments / Extensions
- Canopies
- Signage Supports
- Mezzanine Floors
|
|
CONSTRUCTION STAINLESS STEEL RAILING
Profile wires are again chosen for their aesthetic value with 220, 300 and 560 wires and slot openings from 2mm to 50mm being mostly in demand. Other possibilities available upon request.
The most common support rods are C30, 10x2 or 15x2 and spacings 25, 50, 75 or 100mm. We do recommend however that care be taken of the 'security standard' (sandbag test) when considering oversize infills.
DIMENSIONS AND SHAPING STAINLESS STEEL RAILING
Module lengths do not usually exceed 1200mm however other possibilities can be considered with attention to the 'security standard'.
EUROSLOT constructions can be curved, folded and cut to specific angles in order to conform to site configurations.
|
|
These railings are in wood or combined iron-wood and include balusters and handrail, which can be installed on concrete stairs or as a protective balustrade in attics or lofts. The railings are available in different conformations, with various models of balusters and materials. What is more, it is also possible to fit the railing either internally or externally to the stairs, thus exploiting the flight transit in the best possible way.
|
|
|
Ramp of staircase (or right) Round stainless (or steel): height 110cm (or to measure), 5 smooth (or number with the choice) diameter 8mm, handrail diameter 38mm (stainless, steel or wood), side fixing or on the ground.
|
|
Vertical structure: Mounting brackets made from extruded aluminium alloy EN AW 6060 T6 at an
angular section of 100x80 mm with a thickness of 10 mm. Upright in extruded aluminium alloy EN AW
6082 T6 flat section 100x12 mm with moulding of the upper part and plate cut for joining to the handrail
profile.
Horizontal structure and protection: Horizontally lain aluminium rods EN AW 6005 T6 with 120 -:- 140
cm c/c (centre to centre) and orientation on the vertical axis with inwards inclination to prevent climbing.;
45 mm circular section handrail (Aluscalae code C04555).
Clamping and joints: All the screws and assembly plugs for the structure are made from stainless
steel.
|
|
The solid look and feel of wood without the maintenance
- Classic painted wood style with true architectural details
- Convenient universal rails for the top & bottom rails, topped off by a decorative top rail cap
- Concealed external rail-to-post connection and patent-pending bracket
- Corrosion-resistant stainless steel hardware
- Powder-coated, hot-dipped galvanized steel decorative balusters create a rustic yet customizable system approach
- Three baluster options: Square Composite, Decorative Steel and Colonial vinyl
- Two colors: White & Desert Tan
- 25-year limited warranty with 2-year SureStart™ parts and labor protection (10-year limited warranty on steel balusters)
|
|
|
|
|
|
ENCLOTURE® GLASS
ENCLÔTURE VERRE® : THE HIGHEST STANDARD OF FRAMELESS GLASS FENCING IN RELATION TO POOL SECURITY, TERRACING, BALCONIES, WIND BREAKS, STAIRWELLS, PUBLIC WALKWAYS ETC….
New from Enclôture®. ENCLÔTURE VERRE® is a frameless glass fencing system which offers, security, transparency, comfort, and is aesthetically superb.
The ENCLÔTURE VERRE® system is made of a 12 mm toughened or laminated glass with rounded and polished edges sections. The clamps are made from corrosion resistant 316 stainless steel. They are beautifully designed to hold the glass above the ground allowing water to flow underneath.
The gate used for the ENCLÔTURE VERRE® system is also made of 12 mm toughened or laminated glass with rounded and polished edges. It has a in-floor gate operator, a top pivot hinge, and has a ‘’Magnalatch’’ system which operates with a magnetic pull as well as being self closing and self latching. The system is designed to close gradually without any strong impact.
The Enclôture® Verre system for swimming pool protection has been tested and approved by the Laboratoire National d’Essais (LNE) and meets all the standards set out in AFNOR standard NF P90-306, for use in both private and public/communal swimming pools.
|
|
. Freedom of choice for the specifier
. First class security to Nationally recognised Standards
. Large colour range, to RAL standards
. Recognised corrosion resistance of aluminium
. Simple and speedy assembly
. Easy maintenance, cleaning is all that is required
. Balustrades can be fixed to most site requirements
. Patented mounting assemblies allow large tolerances for fixing to old or uneven floors
. A wide choice of handrailing, balcony dividers and the St. Andrew's Cross complement the HORIZAL range
. Only HORIZAL can offer such a wide choice of possibilities with proven strength and reliability
|
|
Stainless Steel and its refined appearance.
A carefully researched construction allowing for numerous variations, horizontal angles, in rakes, curves and bends. Metaline responds perfectly to pre-cast stairs and complex structures. Made for private and public use and combining finishes with horizontal midrails, glass, mesh and perforated panel inserts and fully conforming to British Standards.
|
|
The Metaglas system is designed for unbroken lines of glass incorporating a top mounted handrail or through the glass handrail.
Atrium surrounds: stairs: balconies and viewing galleries: tinted or screen printed incorporating Metamont LED lighting in the handrail to wash the glass with light.
|
|
SADEV offers 50 x 20 hand railings with fastening parts type flat angle transmissions (Decor range).
This balustrade system can support up to 100 kg.
Laminated tempered glass is highly recommended with thickness ranging from 12 to 25.5 mm.
Trials reports delivered in 2009 by the CEBTP confirm the resistance and reliability of the components for public or private applications in compliance with French legislation relative to hand railings.
|
|
Shark fin handrails combine the esthetics of all-glass handrails and the performance of handrails with posts.
Adapted for laminated tempered glass 12 to 21.52 mm thick, this system supports weight up to 80 kg (2 posts per glass panel). The system provides possible adjustments for a totally safe installation. This handrail complies with the safety rules relative to this family of products.
Trials reports delivered in 2009 by the CEBTP confirm the resistance and reliability of the components for public or private applications in compliance with French legislation relative to hand railings.
|
|
|
Ramp of staircase (or right) Leaf: height 110cm (or to measure), glass tempered 19mm double stratification, with or without handrail diameter 38mm (stainless, steel or wood), side fixing or on the ground.
|
|
Handrail system covering all types of solutions thanks to a wide range of accessories.
|
|
All-glass balustrade system
Floor-mounted glass balustrades, i.e. fitted to the floor slab or steps without using rail posts or load-bearing structures
Full 'ready-to-use' system, including toughened/laminated glass components and fittings; no validation testes required.
|
|
Circum Guardrail with wood top rail - Tempered glass infillpanels
|
|
. Freedom of choice for the specifier
. First class security to Nationally recognised Standards
. Large colour range, to RAL standards
. Recognised corrosion resistance of aluminium
. Simple and speedy assembly
. Easy maintenance, cleaning is all that is required
. Balustrades can be fixed to most site requirements
. Patented mounting assemblies allow large tolerances for fixing to old or uneven floors
. A wide choice of handrailing, balcony dividers and the St. Andrew's Cross complement the HORIZAL range
. Only HORIZAL can offer such a wide choice of possibilities with proven strength and reliability
|
|
Thickness:
up to 12 mm
Supplied:
We are able to manufacture perforated sheets and coils in any format.
Dimensions:
standard measurements (2000 x 1000 mm) and made-to-measure (up to widths of 1500 mm)
Discs, segments, margins and special shapes.
Materials:
Carbon steels; pre-lacquered; galvanized;
Stainless steel; aluminium; copper; brass, titanium; plastics...
Finishes and coatings:
lacquering (RAL colours; textured; any special products...)
Anodized: metallic / organic
Hot and cold galvanising.
|
|
Our handrails are easy to grasp and pleasant to use. The coloured nylon end and corner pieces give a very tidy finish.
- full-length strong aluminium profile
- lead-free acrylic vinyl resin extruded directly onto the aluminium profile
- nylon wall supports in matching colour
- coloured nylon end and corner pieces
- overall depth: 95mm
- handrail diameter: 40mm
- standard profile length: 2500mm
|
|
|
Fixed railing system provides a permanent means of fall protection for hatch openings Meets and exceeds OSHA fall protection regulations (29 FR 1910.23). Bil-Guard® models are available for most roof hatch and automatic fire vent sizes (shown on Type S Roof Hatch).
|
|
|
A carefully researched construction allowing for numerous variations, horizontal angles, in rakes, curves and bends. Metaline responds perfectly to pre-cast stairs and complex structures. Made for private and public use and combining finishes with horizontal midrails, glass, mesh and perforated panel inserts and fully conforming to British Standards.
|
|
|
Ramp of staircase (or right) Classic stainless (or steel): height 110cm (or to measure), 5 smooth square 8x8mm (or number with the choice), handrail diameter 38mm (stainless, steel or wood), side fixing or on the ground.
|
|
|
mounting double flat with predisposition for 3-5-8 cable in acciao inox diam.5mm cross-sectional
|
|
The versatile cable with a bold technical style
Lengths/Span:
Typically suits straight runs up to
ABS2 Type A - 10m (32’) maximum length.
ABS2 Type B - 5m (16’) maximum length.
Cable Diameters:
3mm
4mm
5mm
Specific Features
- ABS2 utilizes the unique Microloc adjuster, a bold contemporary interpretation of the dependable and reliable traditional turnbuckle.
- The articulated fork end and wide range of mating connections are perfect for both stair and horizontal balustrade/railing applications.
- Versatile connection options to suit timber or metal posts.
- Simply tensioned with a standard spanner or wrench – no special tools.
- Unique tamper resistant “press” pin option is available to minimise theft or damage. (below)
- Quality Grade 316 stainless steel construction for harsh environments and long service life.
|
|
A simple, clean and economical cable
Lengths/Span:
Typically suits straight runs up to
ABS2 Type A - 10m (32’) maximum length.
ABS2 Type B - 5m (16’) maximum length.
Cable Diameters:
3mm
4mm
5mm
Specific Features
- An in-line system of minimal visual impact with no bulky turnbuckles to impede views.
- Neat and simple architectural connections for the ultimate clean look.
- Easy tensioning from the outside of the post allows fast installation and minimal time on site.
- The system is perfect for both vertical and horizontal configurations.
- Quality Grade 316 stainless steel construction suitable for harsh environments and long service life.
|
|
|
|
Railings, Handrails, Steps
