|
|
- Type of structure:Marquee / Inflatable dome
- Dimensions:diameter, 50 m — height, 28 m
- Fabrics used:1202 Ferrari® Précontraint, opaque white outside, matt black inside
- What you should know:Inflatable structure ballasted with 10-tonne water rings
The 7,000-sqm roof consists of five elements (a cupola + 4 edge pieces).
Swift putting up and taking down, given the size.
|
|
The pressostrutture are the more effective and economic solution for the realization of winter roofings.
Technology allows the developed to apply us the pressotruttura also in the situations where the emergency conditions have a greater importance, like in the event of elevated amount of present persons.
They can be endowed of the double coibentante liner (in a position to remarkablly reducing the total operating costs) for heating of the ambient inside.
Moreover it is possible to implement finestrature on appropriate chassis, specific for pools, posts antiafflosciamento and so on.
|
|
|
Structural system with a covering membrane fixed to a concrete foundation in which the supporting element is the air.
|
|
The pressostrutture are the more effective and economic solution for the realization of winter roofings.
Technology allows the developed to apply us the pressotruttura also in the situations where the emergency conditions have a greater importance, like in the event of elevated amount of present persons.
They can be endowed of the double coibentante liner (in a position to remarkablly reducing the total operating costs) for heating of the ambient inside.
Moreover it is possible to implement finestrature on appropriate chassis, specific for pools, posts antiafflosciamento and so on.
The pressostatica structure, thanks to the ability to adapt itself to any geostrutturale condition, particularly is indicated for roofings of football fields to seven, fields from calcetto, fields from tennis, handlings, race courses, structures for pools, also with elevated afflusso of persons.
|
|
|
Structural system with a primary structure and a covering membrane fixed on concrete foundations with rigid steel elements with a cylinder shape and free span inside.
|
|
- Type of structure:Fabric over metal arcs
Aircraft storage building
- Dimensions:72 m span x 120 m
- Fabrics used:Ferrari® Précontraint 1302
color shade, white
Weight: 1,350 g/sqm
Resistance: 800/700 daN/5cm
- What you should know:Three-dimensional metal frame
Frame weight: 150 tonnes
Variable span: 72 m at the widest — 42 m at the narrowest
|
|
The tensostruttura is the typical tipologia of the architecture weaves them to free geometry.
The roofing is constituted from a liner in polyester to double spalmatura of PVC, and according to the tipologia chosen, they can be employed various types of technical fabrics.
The tensostrutture to carrying arches, can have the structure in wood, iron or aluminum, and be to mono or double coibentante liner; the advantages of the double liner are the reduction of the thermal coeficiente in the ambient inside, the reduction of condenses and a smaller acoustic resonance
The Tensostruttura can find its application for the roofing of the fields from calcetto, special fields from tennis, handlings, race courses, roofings for manifestations and concerts, fairs, incomes and so on.
|
|
This kind of structures are considered as works that are outside the standard. Is the customer that, for reason of space, use and aesthetic, orders us the whole work, from the external architecture to the internal furniture. This is of course quite a stenouse challenge, but thanks to our technical staff ability and skill and thanks to the cooperation with our associates, the result is always positive. The special tents are not only the ones that differ for the shape or dimension, but are also the ones that aim to facilitate and improve the surrounding environment. Such as for example the need for a museum to create grey area to shelter their own works of art from the light beams.
- MQ: 300 mq
- Covering Materials: PVDF
- Structure Type: Metallic carpentry
|
|
|
|
|
|
A double layer membrane tensile structure was utilized so as to grant aeration as it is the case of a traditionally ventilated roof built with conservative materials. By utilizing a two layer polyester/pvc textile, with dissimilar mechanical specifications and transparency degree, the project minimizes fuel consumption to produce heat in wintertime (closed building + closed air inner space), takes care of the problem to keep the building cool in summertime (open space and removal or folding of the closing perimeter cushions) and reduces solar overheating (the hair funnelled through grates fitted at the base of the building and polycarbonate windows placed on top of the Flying masts).
The final result is that of a light structure which though fitted with a double layer cover, does not prevent clearness and in fact emphasizes it thanks to luminous spots placed at the foot of the flying masts. It is dry assembled thanks to the wise association among the various materials: wood and steel for the primary structures, textile membranes for the cover, pressurized textile cushions for vertical walls, transparent polycarbonate for the roof windows.
|
|
|
PVC can be trated with acrylc laquering or double acrylic laquering to improve the protection and duration of the fabric.
|
|
|
|
|
|
Every era has its own way of constructing buildings for the most spectacular occasions. The unparalleled Millennium Structure is such a spectacular building. A dome measuring 51 metres across!
The circle of large theatres
The leading builders of their time created spaces in which people could participate in the great cultural highlights of the day - from the amphitheatres of antiquity to the opera houses of the baroque period, right down to today's modern stadiums. All have been variations on a single theme: that of the circle.
Brings the people close to the action
When it comes to generating the most intense human contact, the large circle beats all other shapes. Whether for a plenum or a special event, for a conference or a presentation, the circle is still the very best way to bring people together or to bring them as close as possible to an event. In a circular space everybody can see everything, hear everything, and understand everything. Nobody ends up on the margins because they are too far away from the action.
51 metre diametre
With the Millennium Structure, De Boer has developed a new multifunctional circular arena, which is ideally suited to meet the growing demands for special events of all varieties. An area for a new age. With a diameter of 51 metres, it tears up the previously accepted rulebook, in time for the Millennium. No other special events space of this kind has the same flexibility and adaptability: dining for 3000, showcase presentation, conferences, top class parties and much, much more.
|
|
The geodetic structure or reticular structure is the combination of a metallic structure with the roofing in pvc, or in external support that suspended inside.
The liner mails under the structure is tensionata by means of chains and special discs parastrappi; it has remarkable advantages of duration with reduction of the problem of condenses.
The duration of the drop curtain is extended because the liner, not having points of directed contact with the structure, does not endure damages and therefore a quicker degradation because of the rubbing.
The geodetic structure for its characteristics turns out particularly apt for the roofings of fields from calcetto, fields from tennis, and all the tipologie of roofings for the winter seasons.
|
|
The special tensostrutture come adapted to employ various concurring the realization of structures details.
They are realized exclusively on measure and those situations are adapted to all that the normal roofings are not in a position to satisfying.
|
|
Membrane combined with cables, poles and/or arches, steel frameworks, wood and aluminium allows to reach a structural system characterized by particular functional and aesthetic aspects.
Fiberglass fabrics manufactured with very thick and flexible threads coated with plytetrafluorineethylene. Dimensional stability of fiberglass and exceptional self-cleaning properties of PTFE makes this fabric the ideal element for durable and prestigious realisations.
|
|
|
|
|
|
Eide Industries, Inc. fabricated and installed the 100-foot by 150-foot tension structure, designed by KPFF Architects, on a central mast with 1.75-inch stainless steel cabling to the building.
To meet the local Building Department engineering requirements of 80MPH wind loads and 25lbs per s/f snow loads, Eide used Ferrari 392 as the primary fabric cover, with corner and edge reinforcements of RF sealed Ferrari 1502.
Aligned with the ridge cables, the 3-foot wide “snow belts” of Ferrari 1502 were added giving additional fabric supports for Portland’s occasional snowfall. The “snow belts” were edged with 4-inch 20,000 pound webbing tensioned with load compatible ratchet buckles.
- The 5-pointed structure is supported on a central mast with cabling to the building and measures approximately 100-feet by 150-feet.
- The Building Department required engineering 80MPH wind load and 25-pound per s/f snow load.
- The primary fabric was Ferrari 392 with corner and edge reinforcements of RF sealed, Ferrari 1502.
- Aligned with the ridge cables, 3-foot wide “snow belts” of 1502 were added giving additional fabric supports for occasional snowfall.
- The ridge cable and edge cables were 1.75-inch stainless steel.
- The “snow belts” were edged with 4-inch 20,000 pound webbing tensioned with load compatible ratchet buckles.
|
|
- Type of structure:School covered playground — Stretched structure
- Dimensions:16 m x 20 m — height 3 m
- Fabrics used:1002 Fluotop T2 Ferrari Précontraint, white
- What you should know:Height restriction: designed as water intake area
|
|
This kind of structures are considered as works that are outside the standard. Is the customer that, for reason of space, use and aesthetic, orders us the whole work, from the external architecture to the internal furniture. This is of course quite a stenouse challenge, but thanks to our technical staff ability and skill and thanks to the cooperation with our associates, the result is always positive. The special tents are not only the ones that differ for the shape or dimension, but are also the ones that aim to facilitate and improve the surrounding environment. Such as for example the need for a museum to create grey area to shelter their own works of art from the light beams.
- MQ: 5000 mq
- Covering Materials: PTFE
- Structure Type: Metallic carpentry
|
|
This kind of structures are considered as works that are outside the standard. Is the customer that, for reason of space, use and aesthetic, orders us the whole work, from the external architecture to the internal furniture. This is of course quite a stenouse challenge, but thanks to our technical staff ability and skill and thanks to the cooperation with our associates, the result is always positive. The special tents are not only the ones that differ for the shape or dimension, but are also the ones that aim to facilitate and improve the surrounding environment. Such as for example the need for a museum to create grey area to shelter their own works of art from the light beams.
- MQ: 800 mq
- Covering Materials: PVDF
- Structure Type: Metallic carpentry
|
|
Pabellón de Estado, Airport Madrid Barajas
Madrid, Spain
Client: Aeroportos Espanoles y Navegacion Aerea
Architect: R. Rogers London & Studio Lamela, Madrid, Spain
Structural Engineer: Schlaich Bergermann & Part., Stuttgart, Germany
Contractor: Dragados S.A., Madrid, Spain
Material: 4,400 m² PTFE-coated glass fabric, Glass Mesh, ETFE
Year: 2005
|
|
Proving to be the most popular canopy, the Piccadilly Cone canopy is the most contemporary style in our range. It is highly attractive, yet simple and robust providing a comfortable space all year round for smoking and non-smoking customers.
As with all the designs, the Cone canopy is a modular structure, allowing multiples of the same sized unit to be combined to create an attractive and effective covered area providing protection from the sun and rain.
|
|
Sail tents meet the aesthetic requirement of lightness and harmony with the surrounding environment. Through advanced, unique shapes, they are always out of standard production frames. Is always the customer that, guided and supported by our technical office, indicates shape and dimension.
- MQ: 350 mq
- Covering Materials: PES PVC ACRYLIC
- Structure Type: Metallic carpentry
|
|
|
Structural system with internal masts, guyed with steel cables and combined with rings, iron frameworks or domes for membrane support and a perimetral system with poles, steel or fibre tie rods anchored on the ground with temporary systems.
|
|
- Type of structure:Marquee
- Dimensions:22 to 28 m by 18 to 24 m — height 3.5 m
- Fabrics used:Ferrari® Précontraint 702, opaque champagne-colored on the outside, black matt inside
- What you should know:Opaque fabric specially designed for shows. Slanting walls. Double-curved roofing that avoids flapping and slapping in the wind.
|
|
Miroiterie Flon
Lausanne, Switzerland
Client: Losinger Construction, Bussigny , Switzerland
Architect: B + W architecture sàrl, Lausanne, Switzerland
Contractor: LO Immeubles SA, Lausanne, Switzerland
Material: 850 m² PTFE-coated glass fabric / ETFE foil, 4-layer
Year: 2007
|
|
The special tensostrutture come adapted to employ various concurring the realization of structures details.
They are realized exclusively on measure and those situations are adapted to all that the normal roofings are not in a position to satisfying.
The possible applications are varied, beginning from the musical, local roofings for shows and events to the open, lounge summery bars and discotheques, incomes of buildings. The plannings are applicable to all that demand a design and a structure detail.
|
|
|
Made from galvanised mild steel its triangular shape was designed to be aesthetically consistent with the pitched roofs of the surrounding early Victorian buildings.
|
|
|
|
|
|
doublepoint
Footprint
modularrectangles
Width / Size
61m
Std Side Height
4.5m
More information or discuss your project?
Call +31 (0)72 5400 444
or send an e-mail.
Music subtly surrounds your guests. Above the rafters a violet-blue sky glows with ochre-yellow accents. The atmosphere is breathtaking, the colours enchanting. The enormous big top breathes life and atmosphere.
Warmly welcome thousands
Attendance may be in the thousands and yet each of your guests feels personally welcome. A dream? No, your guests are in on of the world's largest big top structures: the New Galaxy by De Boer.
New technology captures ambiance
With this structure De Boer set a trend for a new generation of magic event structures. Traditional atmosphere and new technology have combined into a unique result. From a distance, the contours of the New galaxy form a contemporary skyline. Application of a modern variation of a truss structure and the attractive furnishing add up to a warm interior ambience.
Specification about the New Galaxy.
The highest point of the New Galaxy is 26 metres from the ground and its base is 60 metres wide by 107 metres long, dimensions that make it as big as a football field. This is enough space to receive 4.000 to 10.000 guests in luxury and comfort.
Join to other De Boer structures
And if this size is still too small for your needs, the sister structures the Pink Galaxy and other De Boer tents, can be joined to the New Galaxy for extra accommodation space.
|
|
One of the greatest additions to the extensive De Boer selection is the pagoda style Olympia structure, a modular span tent available in widths of either 20 or 30 metres.
Modern traditional design
The development of the white Olympia structure combines the advantages of a traditional structure with advanced aluminium structures and eye-cathing combined with the quality and security of our patented solid and glass wall panel and door systems.
Modular space
In this way a modern skyline of complete accommodation was created of a rectangular basic shape that can be expanded through the addition of modules into a highly presentable structure. These features make the structure a modern, highly flexible unit that can be adapted effortlessly to the space available.
|
|
|
|
|
|
Think Big, Think Pink. Think Pink Galaxy. Introducing the very latest revolutionary design to De Boer's unbeatable range of temporary structures...the amazing Pink Galaxy.
High quality eye catcher
The eye-catching Pink Galaxy is constructed from high-quality materials that are both strong and durable. Its modular design means the Pink Galaxy can be adapted to suit any event while the vibrant colour scheme ensures your function will certainly attract attention!
Pink exterior
The stunning pink exterior is strikingly visible against any landscape and is the largest and most magnificent enclosure for company parties, exhibitions, concerts, product launches, fairs and large festivals. De Boer's Pink Galaxy really is big and beautiful!
Dark blue interior
Easy to set up and compliant with all safety requirements, the Pink Galaxy can provide a unique setting for your guests. The dark blue interior provides a warm and luxurious ambiance but is also the perfect technical backdrop for all lighting and filming needs.
Great acoustics, unrestricted viewing
The Pink Galaxy can be erected in a week. Up to 18 king poles support the phenomenal roof that reaches a height of over 20 metres. Ingenious spacing of 15-metres between each pair of supporting poles, with 22-metre intervals between neighbouring pairs, allows for sublime acoustics and unrestricted viewing from all angles - essential for all types of events.
|
|
|
|
Tensile structures: complete structures
